Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2023-2025 Superduty 4" Coil Spring Lift Kit w/ Falcon 2.1 Shocks (63-23440)The ReadyLIFT 4 inch Coil Spring Suspension System is a comprehensive lift kit that includes vehicle specific, performance tuned Falcon 2. 1 shocks on all four corners. Designed to improve stance, performance, and capability, this bolt on system is engineered to deliver a better than factory feel, making it ideal for daily driving, off road excursions, and tow haul duties. It includes all necessary components to clear larger wheels and tires while
The ReadyLIFT 4-inch Coil Spring Suspension System is a comprehensive lift kit that includes vehicle-specific, performance-tuned Falcon 2.1 shocks on all four corners. Designed to improve stance, performance, and capability, this bolt-on system is engineered to deliver a better-than-factory feel, making it ideal for daily driving, off-road excursions, and tow/haul duties. It includes all necessary components to clear larger wheels and tires while maintaining optimal Super Duty driving dynamics.
Features
- 4-inch Coil Spring Lift Kit with Vehicle-specific performance-tuned Falcon Shocks.
- Falcon 2.1 monotube dampers on all four corners, with rear shocks featuring adjustable 3-position tuning for daily, sport, or work duties.
- Includes Radius Arm Drops for correct caster angle.
- Bolt-on lift kit - no structural modifications required.
- Engineered to improve dynamic roll control and low-speed damping.
- Provides dramatic improvement in on-road comfort and off-road performance.
- Optimized fitment for unobstructed suspension travel and articulation.
Notes
- Tremor versions will not gain the full 4 inches over stock ride height.
- Trucks equipped with the "Onboard Scale" option will require the Auto-Leveling Headlight Bracket (PN 67-23410).
- New auto headlight brackets are only compatible with stock radius Arms.
Compatibility Notes
- Kits designed for diesel applications only (Power Stroke 4WD).
- Not recommended for 2WD or gas trucks.
- Works for trucks with rear single-wheel only.
- Single Cab configuration has not been validated for fitment and drivability.
Tire Fitment
- Allows for up to 37-inch tall tires on 9-inch wide wheels with +18 offset.
- Recommended tire size is 37 inches by 12.5 inches.
- Recommended wheel: 17 inches and up x 9 inches wide, +25 offset / 6 inches backspacing (minor trimming of the front valance may be necessary).
Specs
- Front Lift: 4.0 inches
- Shock Type: Falcon 2.1 Monotube Front and Piggyback Rear Shocks
- Kit Contents: 4-inch Lift Springs, Falcon 2.1 Shocks, Track Bar Relocation Bracket, Radius Arm Drops, Sway Bar Drops, Bump Stop Extensions, Carrier Bearing Drop, Front Brake Line Brackets, Fabricated Rear Lift Blocks, and a Hardware Pack.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 178 reviews
Sort
Product Reviews
★★★★★ 1
Wobbly
Size: 38"Height × 14" Wide
Not sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 28, 2026
★★★★★ 5
Strong legs, somewhat industrial but trendy also
Size: side table leg
Good legs, some what utilitarian or industrial, they are strong as they are made out of pipe, and assembly is fairly easy once you get the idea of how it goes together. They are roughly 1.5 feet across maybe a bit less adjustable height on each leg, if you have wood floors you may want to put a pad under each leg as they are full metal pipes. Pretty interesting idea and does not cost much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial.
These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026