
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
For Your Every Summer RSVP, with Code: SUMMER15
Description
W10648041 Dishwasher Water Inlet Valve with Elbow Fitting for Whirlpool Kenmore KitchenAid DishwashersW10648041 WPW10648041 Dishwasher Water Inlet Valve with Brass Elbow Kit Key Features Precision Solenoid Actuation: Engineered with an upgraded electromagnetic coil that provides instant response to control board signals, ensuring the exact water volume is dispensed for every wash cycle to maintain optimal cleaning performance. 90 Degree Brass Elbow Fitting: Includes a high durability, lead free brass elbow fitting (3 4 inch GHT to 1 4 inch
W10648041 / WPW10648041 Dishwasher Water Inlet Valve with Brass Elbow Kit
Key Features
- Precision Solenoid Actuation: Engineered with an upgraded electromagnetic coil that provides instant response to control board signals, ensuring the exact water volume is dispensed for every wash cycle to maintain optimal cleaning performance.
- 90-Degree Brass Elbow Fitting: Includes a high-durability, lead-free brass elbow fitting (3/4-inch GHT to 1/4-inch compression) designed for a secure, leak-proof connection to standard household water supply lines.
- Integrated Fine-Mesh Sediment Filter: Features a built-in stainless steel screen that captures sand, mineral scale, and pipe debris before they can enter the dishwasher's internal pumps or clog the delicate spray arm nozzles.
- Anti-Hammer Flow Control: Internally baffled to minimize "water hammer" noise and vibration when the valve shuts off, protecting your home's internal plumbing and ensuring a quieter kitchen environment.
Replaces / Cross-Reference Part Numbers
- W10648041VP
- AP5802887
- PS8760080
- W10195048
- W10195049
- W10219505
- W10219506
- W10219595
- WPW10195049
- 3015273
Compatibility & Fitment
This water inlet valve is the standard replacement for most Whirlpool-manufactured dishwashers produced over the last 15 years. Key compatible brands include:
- Whirlpool & Maytag: Fits hundreds of WDT, WDF, and MDB series models (e.g., WDT720PADM, MDB4949SHZ, WDF520PADM).
- KitchenAid & Jenn-Air: Compatible with various KDTM, KDTE, and JDB series high-end units (e.g., KDTE104ESS, KUDC10FXSS).
- Kenmore (665 Series): Fits many 665-prefix "Elite" and standard dishwashers produced for Sears (e.g., 665.13263K311, 665.13282K113).
- Amana, Roper, & Estate: Direct fit for ADB and DU series models utilizing the W10648041 valve style.
- Note: This valve is typically located behind the lower kickplate at the bottom front-left of the dishwasher.
When to Replace
- Dishwasher Not Filling: The cycle starts and the drain pump runs, but the tub remains dry because the valve is stuck closed or the solenoid has failed electrically.
- Water Leaking into Tub: You find standing water at the bottom of the dishwasher when it is turned off, indicating the internal diaphragm is no longer sealing completely.
- "F8 E1" or "i10" Error Codes: Modern Whirlpool dishwashers display these codes when the control board senses a "Low Water" or "Slow Fill" condition.
- Loud Buzzing During Fill: A loud mechanical hum when the machine tries to take in water suggests the solenoid coil is failing or the internal valve stem is jammed with mineral scale.
- Poor Cleaning Results: If the valve's internal screen is partially clogged, the dishwasher won't fill with enough water to maintain full spray arm pressure.
Installation Tips
- Safety First: You MUST unplug the dishwasher and turn off the water supply valve under the sink before beginning this repair.
- Access the Valve: Remove the lower kickplate (toe kick) at the bottom front. The valve is usually mounted to the left side of the frame with one or two hex-head screws.
- Use Plumber's Tape: Apply a small amount of Teflon tape to the brass elbow threads to ensure a watertight seal, but keep the tape away from the very tip of the fitting to prevent it from entering the valve.
- Check the Clamp: When moving the internal rubber hose to the new valve, ensure the spring clamp is positioned securely behind the barb to prevent the hose from blowing off under pressure.
- Leak Test: After installation, turn the water back on and run a "Rinse" cycle before reinstalling the kickplate to verify there are no drips at the threaded connection or the outlet hose.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy