Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MRI Transport Table without Side Rails, 80 cm wide | light blueProduct overview With mobile frame Two part lying surface 2 or 4 lockable castors Optionally available with side rails Available with various dimensions and colours MRI Transport Table, High Quality CrNi Steel This MRI transport table from AGA is made of high quality materials, making it ideal for use in the MRI area. Even the smallest parts, like screws, are made of stainless steel and the easy to use headrest adjustment mechanism is great for
Product overview- With mobile frame
- Two-part lying surface
- 2 or 4 lockable castors
- Optionally available with side rails
- Available with various dimensions and colours
MRI Transport Table, High-Quality CrNi Steel
This MRI transport table from AGA is made of high-quality materials, making it ideal for use in the MRI area. Even the smallest parts, like screws, are made of stainless steel and the easy-to-use headrest adjustment mechanism is great for optimally positioning the patient during transportation and during the exam.
This mobile exam table is available as different variations based on width and side rails. Should you need a height other than the standard 65 cm on this MRI table, simply contact our customer service to order a table with a different height at no additional charge.
Quality Made in Germany
- 36 month warranty
- Maintenance free
- Replacement parts delivered for at least 10 years
Product Details
- MRI table with mobile frame
- Available with various widths and side rails
- Frame material: CrNi steel
- Screws and adjustment mechanism made of stainless steel
- 4 castors with 100 mm diameter
- Variations without side rails: 2 castors can be locked
- Variations with side rails: 4 castors can be locked
- Continuously adjustable headrest via clamp rod mechanism (+40°)
- Two-part lying surface
- Available widths: 65 and 80 cm
- Optionally including side rails
- Dimensions of rotatable side rails: 80 x 25 cm (L x W)
- Total table width incl. side rails: 795 or 975 mm
For the Following MRI Systems
- 3T: mMR, Prisma, Prisma FIT, Sectra, Skyra, Skyra FIT, Trio, VERIO, Verio Dot
- 1.5T: Aera, Amira, Avanto, Avanto Dot, Avanto Fit, Espree, Essenza, Essenza Dot, Sonata, Symphony, Vision
- Harmony (1T), C! (0.35T), Concerto (0.2T)
AGA High-Quality Upholstery Material
This MRI transport table has specially optimised padding that is composed of various foam sections with various thicknesses. This provides higher patient comfort due to the softer sections, while simultaneously retaining robustness and padding longevity due to the harder sections.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 320 reviews
Sort
Product Reviews
★★★★★ 5
Great for the storm shelter!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
In our storm shelter we had some lights that we tried to hang up, multiple times, with no luck! Then I found these garage hooks. They are overkill for the lights, but I’m so happy that we now have lighting in the storm shelter. I could think of so many other uses for these. They strength of the magnets is awesome!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 4
Magnet is super strong but hooks are not adjustable
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
I ordered this set of Mutuactor magnetic hooks because I was tired of thinking I had things organized and then finding previously hung magnets have slid down the wall.
It was a first for me to have to assemble a magnetic hook. This was made slightly more difficult by requiring a wrench. So many items these days arrive with a disposable little hex wrench or whatever is needed for assembly. Not in this case. Maybe the manufacturer assumes if you are spending $15 per magnet to hang your tools you have a wrench handy. Anyway, I got my wrench and found no instructions. I know from life that the order is bolt-washer-lock washer-nut. The next question arose when I found one bolt and several holes... hmmmm. It looks like they wanted to provide the option to screw the hooks directly to the wall. I am not sure the average person would pay that price just for a hook, though. I chose a hole and it seems to be the right one.
The good news is I was quickly in business. Soon one magnet was snatched by my husband for his rolling tool cart. He hung his (very heavy) Sawzall and the magnet never moved. He liked the rubber coating that protects his tools. I chose to take advantage of the amazing grip of this thing to hang my most used (and also very heavy) all-clad pan from the side of my fridge. The refrigerator had some sort of glossy powder coat and magnets hold well if you try to pull them straight off but end up sliding down anyway. This is where I came to appreciate the rubber shoe of this magnet. It protects my fridge but I think it plays an essential part in the grip strength of the magnet. I can not slide it around - I need to use two hands to pull it off then place it in another position.
To give a magnet strength example I had one magnetic hook on my desk as I was writing this review. My nearby desk-size scotch tape dispenser came sliding over and the magnet grabbed it. I was able to lift the tape dispense just by the magnet grabbing the little piece of metal serrated teeth that cut the tape. There is no other metal in my dispenser. That's it!
In summary, four stars because it REALLY grips and holds a lot of weight. Minus a star because I do think they are a little expensive, they required assembly without tools or instructions, and the hooks themselves are not adjustable. I have some similar magnetic hooks and you can move the two prongs apart or together depending on what your tool size is. These prongs are strong and firm and are not moving and this cuts down of the number of uses a little bit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 5
Develop some quality, worth-while hangups!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
Organization is key for any shop space. This goes double for smaller shops. If you look around and DON'T see something that could benefit from getting off the floor and onto a peg or hook, I applaud you! For the rest of us, where can we get started? Here you go.
These hooks come two in a package. The quality of these are easy to see. The powder coating is very nice as powder coating is more durable than paint. The orange plastic coating on the hooks feels thick and durable. Assembly is easy. There's a threaded post sticking out of the black rubber coated magnet "puck" that you insert into a opening on the hook and secure with washers and a nut. I like that they included both a washer and locking washer. If it matters, I always stack the fastener in the following order: washer, locking washer, then nut. Using a 14mm socket, I was done in no time.
How's much will these hooks hold? The magnetic power on these hooks feels substantial. When I slowly approached the side of my metal toolbox, the magnet made an audible snap when it magnetized to the side. It felt strong! The bend at the base of the hook added stability pressing against the toolbox but didn't mark the surface since it was covered by plastic. It held my heavy 50a extension cable and the other hook held both my 25' and 50' pressure washer hoses. Neither moved at all and felt very secure.
Whether your shop is your garage or basement, making the most of your space makes a difference and these can help. These are very strong and hold items safely. I'm very happy having these around and will be getting more. If you have a metal surface that you can attach hooks, give these a try. It's a quality solution!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026
★★★★★ 1
Not strong
Style: Updated 3.46in Magnet L Red Hooks 2PCS
The magnets are not strong enough to hold garden tools!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Awesome product!!!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
Wow when they describe these magnets as “super string” they are not joking! Magnets are so strong you must be careful when placing them on your metal cabinet, lest it pinch your finger when the magnet grabs the metal!
This is an awesome product. The hooks have a hole in their base that fits over a threaded post / bolt coming out of the center of the magnet and the kit comes with two washers, lock washers, and bolts to attach the hooks to the magnets. Takes about one minute per magnet to assemble. Once on the wall they feel like they will hold a lot of weight though I did not try to test the upper limit. No problem at all holding yard tools and the like. The hooks or arms have a nice rubberized coating and extend about 4.5” out from the wall. At $15 each these seemed a little pricy but wow what a great solution for hanging things on metal walls. They work so well I will be buying more of these! I actually have some other similar very strong round magnets made for a similar purpose … but they do not have the “built-in” hooks like these do and it makes a big difference for the usefulness! Considering all of that I think they are a great value. Item reviewed: MUTUACTOR Updated Super Strong Magnetic Hooks,40lbs, 2-pack
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
recommand products
DeatschWerks 8AN ORB to Polaris RZR Turbo OE Regulator Adapter - Anodized Matte Black
50.00
DeatschWerks 8AN Female Flare Swivel to 3/8in Male EFI Quick Disconnect - Anodized DW Titanium
28.00
DeatschWerks ORB -6 Viton O-Ring (Pack of 10)
15.00
DeatschWerks 6AN ORB Male to 1/2in Male Barb Fitting (Incl O-Ring) - Anodized Matte Black
11.00
DeatschWerks 8AN ORB Male to 10AN Male Flare Adapter - Anodized Matte Black
12.00