Zwarte Toermalijn brok 2
SKU: 39005070573

Zwarte Toermalijn brok 2

$17.95 $19.95
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Zwarte Toermalijn brok 2Zwarte Toermalijn staat bekend om zijn sterke beschermende en aardende werking, helpt hij bij het afweren van negatieve energie en het versterken van je persoonlijke ruimte. Ruwe brokken zijn perfect om ergens in huis te leggen (bijvoorbeeld onder het bed of voor de laptop wifi) Zwarte Toermalijn heeft de volgende kenmerken: Ideale steen ter bescherming tegen negatieve energie en elektronische apparaten Heeft een aardende werking en is helpend bij

Zwarte Toermalijn staat bekend om zijn sterke beschermende en aardende werking, helpt hij bij het afweren van negatieve energie en het versterken van je persoonlijke ruimte. Ruwe brokken zijn perfect om ergens in huis te leggen (bijvoorbeeld onder het bed of voor de laptop/wifi)

Zwarte Toermalijn heeft de volgende kenmerken:

    • Ideale steen ter bescherming tegen negatieve energie en elektronische apparaten
    • Heeft een aardende werking en is helpend bij stress en spanningen
    • Werkt ontspannend en vergroot vitaliteit
    • Zet negatieve gedachtes om in positieve
    • Heeft een positieve werking op het immuunsysteem, rug, spieren en zenuwstelsel.

    Specificaties:

    • +- 215 gram
    • +- 8 x 4,5 x 3,5 cm 

    Je ontvangt de Zwarte Toermalijn van de foto. 

    Hoewel we ons best doen om de foto's zo duidelijk mogelijk te maken, zijn edelstenen natuurproducten en kan de kleur licht afwijken.

    Disclaimer: De werking van edelstenen is niet wetenschappelijk bewezen, en kan door iedereen anders (of helemaal niet) worden ervaren. Lees hier meer informatie.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 39005070573

    Discover Niche Categories That Outsell

    Top-Converting Item to Boost Your Average Order

    4.4 ★★★★★
    Based on 951 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    P
    Verified Purchase
    Peter Schott
    Chelsea, US
    ★★★★★ 5
    Use the best oil to protect your investment
    Configuration: 4-Stroke, Size: 1 GA
    Great product.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 30, 2025
    S
    Verified Purchase
    Steve M.
    New York, US
    ★★★★★ 5
    Works well. You need to drill a 3/8” hole
    Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 16, 2026
    N
    Verified Purchase
    Nancy filippi
    Lexington, US
    ★★★★★ 5
    A must pull your gimbal bearing
    You do need to drill a hole but worked perfect
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on December 26, 2025
    R
    Verified Purchase
    rich911s
    Draper, US
    ★★★★★ 5
    Worked for Volvo Penta SX Gimbal Bearing
    Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on June 5, 2023
    G
    Verified Purchase
    Greg
    Lake Worth, US
    ★★★★★ 5
    Great value
    This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 16, 2024

    recommand products

    GB RAVEELDRAGER MIDI (BARCODE) 280/46X117 SV 1,5
    17.34
    GB RAVEELDRAGER ZWAAR 415/ ..X.. 304 2
    11.52
    GB GORDINGLAS 46X96 SV 1,5
    25.96
    GB RAVEELDRAGER MIDI (BARCODE) 280/59X110 SV 1,5
    17.34
    GB HOEKANKER ZWAAR 40X150 TV 80X10
    147.29