Michelle Tecnoarm 2 Reference Class TonearmMICHELL TECNOARM 2 REFERENCE CLASS TONEARM The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price! Utilising a custom one piece arm tube, the tube is shot blasted to make it more rigid and then 22 holes are drilled in the underside to reduce mass. The underside of the integral head shell is machined to be perfectly parallel with the bearing

MICHELL TECNOARM 2

REFERENCE CLASS TONEARM

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price!

Utilising a custom one piece arm tube, the tube is shot -blasted to make it more rigid and then 22 holes are drilled in the underside to reduce mass. The underside of the integral head shell is machined to be perfectly parallel with the bearing position. The tonearm is then assembled using the new ultra-low friction polymer bearings and mounted on a redesigned mounting base.

The TecnoArm 2 is wired with our proprietary wiring loom and 99.9999% pure silver litz wire, from cartridge tags to phono plugs, with no internal wiring joints.

Our TecnoWeight counter weight allows you to set the tracking force for your chosen cartridge easily and our new VTA/SRA adjuster sets the height of your tonearm, helping you ensure the stylus tracks the vinyl groove at the correct angle.

The TecnoArm 2 has been designed to offer a truly audiophile listening experience with exceptional value for money. This is a tonearm that can easily compete with others three times the price!

FEATURES & SPECIFICATIONS

• One-piece perforated arm casting with internal foam
  damping
• Proprietary silver litz cable in a continuous run from
  cartridge to amplifier
• PTFE dielectric, metal braided shielding, separate
  ground wire
• Silver-plated cartridge clips and phono plugs
• Two counterweights, matching cartridges of 4-7g and 7-
  13g
• Vertical tracking force adjuster in steps of 0.1g
• Vertical tracking angle adjuster
• Finger locknut for easy arm removal or VTA adjustment
• One year warrantyWeight 4.6 kg
• Dimensions 49 (w) x 31 (d) 8.5 (h) cm
• Effective mass - Low / 12.5g
• Mounting distance platter centre to arm hole centre 222mm

Please note:
The TecnoArm 2 is only compatible with Rega turntables that utilise ‘Double brace technology’ if you do not use the VTA adjuster.