DRT Motorsports UHD (AL7075) Tie Rod Kit, Polaris PRO XP Platform 64"
SKU: 75237311856

DRT Motorsports UHD (AL7075) Tie Rod Kit, Polaris PRO XP Platform 64"

$146.25 $162.50
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

DRT Motorsports UHD (AL7075) Tie Rod Kit, Polaris PRO XP Platform 64"20010TR05201 20010TR05201 The DRT Motorsports UHD (AL 7075) Tie Rod Kit for the 2020+ Polaris PRO XP Platform (64") is designed to strengthen and add reliability to the this potent powerplant. Made of 7 Series (UHD Ultra Heavy Duty) 7075 billet bar stock, the DRT Pro XP tie rods are much stronger than standard 6061, lighter in weight, and able to be machined to a smaller diameter without sacrificing strength in order to clear all components through

20010TR05201
20010TR05201 – The DRT Motorsports UHD (AL-7075) Tie Rod Kit for the 2020+ Polaris PRO XP Platform (64") is designed to strengthen and add reliability to the this potent powerplant. Made of 7 Series (UHD – Ultra Heavy Duty) 7075 billet bar stock, the DRT Pro XP tie rods are much stronger than standard 6061, lighter in weight, and able to be machined to a smaller diameter without sacrificing strength in order to clear all components through the entire range of motion. Even at full droop or compression, this tie rod set will clearance all suspension and steering components at any point in the steering range so you can ride with confidence.
The 20010TR05201 works in conjunction with the OEM steering rack part number 1824946 and replaces the OEM Rod Ends part numbers 7061257 and 7061258. We use 3 piece PTFE lined 5/8” chromoly rods ends and our proprietary inner ball joint to provide sealing of the OEM bellow and protect the steering rack from intrusion of water, dirt, and sand. DRT spec stainless steel misalignment spacers and class 10.9 hardware is used to provide the required clamping force to keep you on the trail.
The DRT Tie Rods are finished in Military Grade anodized black and marked with the DRT Motorsports; proudly made in the USA.
• Designed for Polaris RZR Pro XP/4 (64”) application
• Machined from aerospace grade 7 series 7075-T6 aluminum
• Military Specification Anodized finish
• Laser engraved branding
• 3 pieces PTFE lined Left/Right hand 5/8 chromoly rods ends
• Machined wrench notch areas for adjustability
• 303 Stainless Steel rod end spacers
• Made in the U.S.A.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 75237311856

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 220 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Steve H
Omaha, US
★★★★★ 5
It's the Genuine Part - Fits Large Selection of Mercedes Cars
Size: Pack of 1
There is no doubt that I like to take care of my vehicle. Therefore, with a car that calls for oil changes only every 10,000-13,000 miles, I want to be sure to use the approved oil filter that can survive that long. First, let me put this early in the review. I had had the Mercedes Branded and Box part side by side with this one. They are identical besides the labeling (and part of the labeling is the same as the Mercedes branded one still has the Mann logo and part number too). They are identical because Mann makes this filter, their own brand, and the filter for Mercedes. They are truly one in the same. These Mann HU 718/5 have a beautiful, strong construction, and indeed they are actually the OEM part. The OEM Mercedes-Genuine part has the Mann HU 718/5 part number right next to the Mercedes part number. The only thing missing on this filter is the Mercedes-Benz star logo, Mercedes part number, and the Mercedes-Benz box. Indeed, the filter is made in Germany as well for anyone wondering. Several of the other aftermarket brands actually use the OEM filter rebranded too, as of this writing, K&N oil, and Purolator oil. However, those products tend to be much more costly since those companies must buy the filters from Mann and resell them. The Mann branded filter is the best value and easiest to procure since it is right here on Amazon! How could it be any easier? I will only say that the OEM dealer Mercedes labeled filter is not too much more money than this one. Therefore, if you ever happen to be at the dealer or know of a dealer that has good parts pricing, you shouldn't necessary run from the genuine filter. It's the same as this and depending on the dealer, might just be a couple dollars more, if you're in a pinch and can't wait. Overall, extremely recommended filter. You can't argue with the original product! This OEM filter is designed to hold up for the extremely long oil change intervals recommended by Mercedes. Just be sure to use this filter along with an approved oil such as Mobil 1 0w40.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2012
N
Verified Purchase
Nathan S
Lake Worth, US
★★★★★ 4
Good, inexpensive filter for Euro cars
Size: Pack of 1
I use these on my BMW, Mercedes, and Volvo cars ('02 and a '99, don't get any ideas) and they work great. Much nicer than the cheap STP / Fram crap at AutoZone or O'Reilly, and not that much more expensive. The Merc and Volvo share the same filter model, and these come with 2 different sets of o-rings and washers in little baggies labeled "Mercedes" and "Volvo" which I thought was pretty cool.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 19, 2024
A
Verified Purchase
al thompson
Lake Worth, US
★★★★★ 5
I use on my 2012 GL450
Size: Pack of 1
I use on my 2012 GL450 very pleased.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
Jeff
Boise, US
★★★★★ 5
Top Quality Filter
Size: Pack of 1
I always go with Mann Filters, Trust me, all filters are not equal and these are one of the best you can buy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
A
Verified Purchase
A regular Joe
San Leandro, US
★★★★★ 5
Nice Filter Wrench for my Volvo V70XC!
Size: 86mm x 16
I was needing a filter wrench for my 2001 Volvo V70XC and couldn't find anything that fit from the local auto parts stores. Not knowing what to expect, I took a chance on this one since most of the reviews were 5 star and the price was exceptional. When I received it, I was quite pleased with the construction and finish. I have a brand new oil filter housing for my Volvo (since the one currently on my car is chewed up from the former owner using slip-jaw pliers or something on it) and the fit is perfect! I have worked as a mechanic my whole life (aircraft & automotive), and spent a couple of years as a technician at an automotive dealership and I can say that the tool looks like it is designed for heavy-duty use. The stamped steel housing is thicker than those found in local auto parts stores and the drive adapter has a thick arc welded bead along the inside of the tool. So, it appears to be made to hold up to some fairly heavy torque. Although the product description states that it is 1/2", the drive adapter is actually made for direct attachment to a 3/8" drive. Perhaps this error stems from the fact that they offer a much larger wrench (118-131mm) and this is a more accurate description of their other offerings. The 3/8" drive adapter works perfectly and a 21mm socket fits nicely on the external hex. Fits with SAE sizes are a mixed bag, though. I was able to attach a 13/16" 12-pt. box-end wrench, but not the opposing open-end. A similarly sized 13/16" 6-pt. socket was extremely tight, so I wouldn't recommend this size and would just go with the 21mm if you had to use the external hex. Otherwise, just use the 3/8" drive adapter for easiest use of this tool. The adapter also incorporates ball detents on all four sides of the internal 3/8" drive, so your ratchet or extension won't easily fall off while in use. Since this tool is made for oil filter removal & installation, I'm sure that it will deliver as promised. I'll post an update after my next oil change and I get a chance to use it and install the new filter housing I have.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2014

recommand products

1.08 Ct Cushion Lab Diamond • E VVS2 IGI
247.47
1.09 Ct Cushion Lab Diamond • Fancy Intense Blue VS2 IGI
1261.97
1.1 Ct Cushion Lab Diamond • D VS2 IGI
10132.00
Bridgerton - Penelope Pop! Vinyl
15.00
Road Trip Adventure PS2
12.95