697202 - Timer Kit - Electromechanical 120 Min w/Hold, with Knob and Mounting Screws - Replaces Associated 611245

697202 - Timer Kit - Electromechanical 120 Min w/Hold, with Knob and Mounting Screws - Replaces Associated 611245Timer Kit Electromechanical 120 Min w Hold, with Knob and Mounting Screws Replaces Associated 611245 This popular timer is used in virtually all chargers manufactured by Associated Equipment, such as models 6001A, 6002B, 6009, 6006, 6010, 6012, US20 and more. Easily installs with 2 #6 Phillips screws (included) through the charger panel and into the body of the the timer. An OEM style spring clip pointer knob is included. Wire terminals use . 250"

Timer Kit - Electromechanical 120 Min w/Hold, with Knob and Mounting Screws - Replaces Associated 611245
 

This popular timer is used in virtually all chargers manufactured by Associated Equipment, such as models 6001A, 6002B, 6009, 6006, 6010, 6012, US20 and more. Easily installs with 2 - #6 Phillips screws (included) through the charger panel and into the body of the the timer. An OEM-style spring-clip pointer knob is included. Wire terminals use .250" industry-standard solderless push-on connectors. No specialty tools required.

This switch typically mounts in one of two orientations:

Horizontal Mount - the mounting screws are aligned horizontally (at 3 and 9 o'clock) and the OFF position is at approximately 2 o'clock on the timer dial face.

Vertical Mount - the mounting screws are aligned vertically (at 12 and 6 o'clock) and the OFF position is at approximately 11 o'clock on the timer dial face.

In either orientation, the timer has a "HOLD" position (constant ON) when rotated counterclockwise from OFF by approximately 15 degrees. Otherwise, when rotated clockwise to a set position, it will countdown back to the OFF position and power off the charger.

Replaces

Associated Equipment 611245

Features

- 120 Minute duration, with "HOLD" position.
- Mounts in charger panel with included screws.
- Straightforward instructions and simple design allows easy installation. No special tools are required.
-Made in the USA

Specifications

- .250" Push-on connectors
- Switched Current Rating - 15A, 125/250VAC, 50/60HZ
- Timer body - 2.476"H x 2.01"W x 1.969"D
- Stem - .815"L x .248" Diameter

Contents

1 - 697200, 120-minute electromechanical timer (EXACT OEM replacement for Associated 611245)
1 - 696550, spring clip pointer knob (EXACT OEM replacement for Associated 603147)
2 - 609063, mounting screws
1 - 609063, timer dial label - horizontal mount
1 - 609064, timer dial label - vertical mount
1 - Installation Instructions

Information Downloads

697202 Installation Instructions