697201 - Timer ONLY, No knob - 120 Min Electromechanical, Threaded Bushing Mount

697201 - Timer ONLY, No knob - 120 Min Electromechanical, Threaded Bushing MountTimer ONLY 120 Min Electromechanical, Threaded Bushing Mount (NO KNOB) This is the most economical way to purchase this replacement timer. It is the best value if the timer dial face on your charger is still legible (you don't need dial labels) and you can re use your old knob all you need is the timer itself. This timer replaces obsolete electromechanical timers in a variety of older battery chargers. Note that the installation of this timer is

Timer ONLY - 120 Min Electromechanical, Threaded Bushing Mount (NO KNOB)

This is the most economical way to purchase this replacement timer. It is the best value if the timer dial face on your charger is still legible (you don't need dial labels) and you can re-use your old knob - all you need is the timer itself.

This timer replaces obsolete electromechanical timers in a variety of older battery chargers. Note that the installation of this timer is probably not a direct “bolt in” replacement. Some modification of the charger cabinet may be necessary (e.g.- drilling holes), as well as a basic electrical knowledge and skill level.

Basic electrical tools are necessary. A multi-meter may also be required.


- Mounts with lock washer and panel nut on threaded bushing around the knob stem (nut & washer included)
- Made in the USA

DOES NOT INCLUDE KNOB or TIMER DIAL LABELS. If you need these parts for your installation, order 697203 Timer Installation Kit, which includes these items with the timer.

Specifications

Input: 120 VAC
Connectors: .250" push-on
Switched Current Rating: 15A, 125/250VAC, 50/60HZ
Timer body Dimensions: 2.476"H x 2.01"W x 1.969"D
Bushing sleeve thread: 3/8"-32
Stem: .815"L x .248" Diameter
Shaft Width at Flat: .156 in (approximately 1/3 removed)
Supplied Hardware: 3/8"-32 panel nut and external star lock washer (1/2 in hex drive)

Information Downloads

697201 Installation Instructions