Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
E3D Revo Hemera XS Coldside KitsIntroducing the Revo Hemera XS Coldside Kits available in direct drive (12V or 24V) or bowden kit types. Features Shorter and lighter. Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printers motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it occupies less space inside your 3D printers build volume
Introducing the Revo Hemera XS Coldside Kits available in direct drive (12V or 24V) or bowden kit types.
Features
- Shorter and lighter. Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it occupies less space inside your 3D printer’s build volume – useful for smaller 3D printers.
- Capable with wide range of 3D printing filaments. Enjoy excellent performance with all 3D printing materials, particularly challenging materials like flexibles and abrasives. Enhanced extrusion and retraction control means you can 3D print soft flexibles with a shore hardness as low as 75A!
- Backwards compatible. The heatsink geometry for Hemera XS accepts Revo Nozzles as well as V6 nozzles with a Hemera HeatBreak (sold separately).
- All the force you need. Hemera XS has all the extrusion force you need to drive the entire E3D ecosystem, including high flow HotEnds like SuperVolcano and Revo High Flow Nozzles.
- Less likely to strip filament. In the event of a jam, the filament drive mechanism for Hemera XS will stall instead of stripping filament, making it easier to recover and get 3D printing again.
- Better safety. Power reduces to the Revo HeaterCore as it gets hotter, thanks to built-in PTC behaviour. This gives you greater protection against hazards caused by thermal runaways.
- T-slot flat mounting. Our custom mounting system means a range of accessories can be mounted on this extrusion system, such as bed levelling probes, expansion boards, and more!
Pair with your perfect Hotside
Pair your Hemera XS Extruder with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box. All Hotside packs come with your heating and sensing elements plus a variety of nozzles for you to start quick swapping with. Select from the following options:
- Starter - Ideal for users printing at standard speeds with PLA, PETG and ASA
- High Flow - Perfect if you're looking to push your Prusa printer's print speed capabilities to the limit
- High Flow X - All the benefits of the High Flow pack with the bonus of abrasive resistance for printing with fibre filled materials
Includes
- 1 x Hemera XS Extruder
- 1 x Hemera fixings kit
- 1 x 40 x 40 x 10 mm 12V or 24V Fan
- 1 x Extension cable kit
Browse more
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 1460 reviews
Sort
Product Reviews
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease.
The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete.
It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
★★★★★ 5
Great tool, well worth the money!
I'm thrilled and pleased with the Worx edger. I bought it because it's electric, cheaper than other styles and I don't have to fool with a 2 stroke engine. I bought Worx, because it has a good guide to help me keep the blade away from the sidewalk, as well as a white mark on the housing to give a general idea of where the blade was. Also I thought it seemed to have a good engine. Now I'm sure it has a good engine. I looked at 3 other comparable trimmers, and because of the guide and engine, chose Worx. I read the 1 star reviews, many of the 5 star reviews and in between, as well as all the specifications I could. One of the competitors was attractive to me, but the 1 stars indicated there was a small tendency for the engine to quit. There were many less reviews for most of the models and many for that one, but I chose this one for the same amperage of engine, but less HP, which might, in my mind, over-work the engine which would account for it being ruined. One had a better warranty, but Amazon offered 2 more years for about $750, so I upgraded the warranty to 4 years,I have Tall Fescue grass in sandy loam soil in SE Wyo because of drought resistance, and it's a Northern grass). The grass is taller and tough as well as more in clumps. The ground probably is much easier to work than clay. The edger handled the tall grass ok, with all the clippings which had accumulated. I It was a long hard job to do the first trimming, and I was impressed with the 'Worx. I tried not to work it harder than necessary but it took more than 5 or 6 hours of work. I used the blade down almost to the long hole marker and had parts of 2 teeth left. It worked well; didn't clog; had power. Didn't ruin the engine. Didn't work me hard! I had to tighten the blade after about 10 feet, but only that once. In one area I had to run it on the wrong side, with the wheels on the grass. It worked ok, but worked much better where it was possible to put the wheels on the cement, and thus use the guide! It would be nice to be able to move the handle and the guide to the other side instead of the way I did it. The cord holder worked poorly for a 3 wire 12 gauge extension cord, but worked fine when I got out the smaller 14 g. The metal trimmer guide that helps hold the blade away from the side walk pulls up for use of the edger as a trencher. My lawn looks terrific. The blades were MUCH more expensive than the B & D; so before I bought Worx, I searched the internet and found an electric company which had a 3 pack of original equipment blades for it for $28, and on sale for $22. I scored on the tool, and on the blades! PTL!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 13, 2015
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it.
However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep.
The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market.
Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Works Great!
Much quieter than I was expecting. Lawn had needed this for years, I regained 6"-10" of driveway/sidewalk back. Makes the rest of the neighborhood look bad LOL Only the cleaning up wore me out, but it should be much easier next time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
★★★★★ 5
Gets the job done for a small lawn
Color: 15-Inch
I have a smaller yard, and this works GREAT!!! I have used it several times now. I do not use the bag because my municipality doesn't pick up yard clippings more than once a year. I mow every 7 to 10 days on a middle setting. The only thing that I can complain about is that it doesn't work well if pulling it in reverse. It still cuts fine, but the rubber flap that keeps the grass from flying back at you is a bit long if you want to be able to pull the mower. It can be removed easily if you choose to, but I would at least recommend wearing eye protection if you take it off since it is there for a reason. It maneuvers easily and gets very close to the edges, so I have not had to weed whack at all! It is a light mower and easy to use. Basic maintenance like keeping it covered or in a dry spot when not in use and flipping it to the side to clean the debris from under it after use, and you should have a good mower for a long time. That being said... I DID get the 3-year warranty on it. I know from a past experience with a different company that electric corded mowers are VERY hard to get serviced, so if anything goes wrong, you basically have to replace it. At least this way, my investment will be guaranteed to last several years.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026