SKU: 64333069746

Holybro Pixhawk 6X Autopilot PX4 Kit

Sale price$103.26 Regular price$114.73
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Holybro Pixhawk 6X Autopilot PX4 KitInside the Pixhawk 6X, you can find an STMicroelectronics based STM32H753, paired with sensor technology from Bosch, InvenSense, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. The Pixhawk 6X's H7 microcontroller contain the Arm Cortex M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. The PX4 Autopilot takes advantage of the increased power and RAM.

Inside the Pixhawk®​ 6X, you can find an STMicroelectronics​® based STM32H753, paired with sensor technology from Bosch®​​, InvenSense®​,​ giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6X's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. The PX4 Autopilot takes advantage of the increased power and RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability.

An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.

The Pixhawk®​ 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.

The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or QGroundControl.

Features

  • High performance STM32H753 Processor
  • Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk®​ Autopilot Bus connector.
  • Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
  • Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
  • Newly designed vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
  • Ethernet interface for high-speed mission computer integration
  • IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Pixhawk Baseboard v1 to v2

  • The Pixhawk Baseboard v1 has been replaced by the v2A & v2B, with the following updates
  • Smaller and More Compact Design: The overall footprint of the board has been reduced, making it easier to integrate into various applications.
  • New Robust Pin Header Design: Improved reliability with a improved pin header housing.
  • Added PWM Level Shifter: Allows PWM output signal levels to be switched from 3.3V to 5V via a resistor.
  • Change to Aluminum CNC Case: High-quality aluminum CNC outer case offers durability, efficient heat dissipation, corrosion resistance, aesthetic appeal, and EMI shielding.
  • Two Models Available: Model A and Model B, each with the pin header facing different directions for more flexibility in installation.
  • Relocated of Ports: UART4 & I2C, SPI, AD & IO, DSM RC, and JST USB ports have been moved from the top to the side of the board. AUX7, AUX8, and SBUS_OUT/RSSI_IN move to the side in a JST-GH Port.

Specifications

  • FMU Processor: STM32H753
  • 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
  • IO Processor: STM32F100
  • 32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
  • On-board sensors
  • 3x ICM-45686 IMU sensors (±32g) with BalancedGyro™ technology
  • Mag: BMM150
  • Barometer: 2x BMP388

Electrical data

  • Voltage Ratings:
  • Max input voltage: 6V
  • USB Power Input: 4.75~5.25V
  • Servo Rail Input: 0~36V
  • Current Ratings:
  • Telem1 output current limiter: 1.5A
  • All other port combined output current limiter: 1.5A

Dimensions

  • Dimensions
    • Flight Controller Module: 38.8 x 31.8 x 14.6mm
    • Standard Baseboard: 52.4 x 103.4 x 16.7mm
    • Mini Baseboard: 43.4 x 72.8 x 14.2 mm
  • Weight
    • Flight Controller Module: 23g
    • Standard Baseboard: 51g
    • Mini Baseboard: 26.5g

Interfaces

  • 16- PWM servo outputs
  • R/C input for Spektrum / DSM
  • Dedicated R/C input for PPM and S.Bus input
  • Dedicated analog / PWM RSSI input and S.Bus output
  • 4 general purpose serial ports
    • 3 with full flow control
    • 1 with separate 1.5A current limit (Telem1)
    • 1 with I2C and additional GPIO line for external NFC reader
  • 2 GPS ports
    • 1 full GPS plus Safety Switch Port
    • 1 basic GPS port
  • 1 I2C port
  • 1 Ethernet port
    • Transformerless Applications
    • 100Mbps
  • 1 SPI bus
    • 2 chip select lines
    • 2 data-ready lines
    • 1 SPI SYNC line
    • 1 SPI reset line
  • 2 CAN Buses for CAN peripheral
    • CAN Bus has individual silent controls or ESC RX-MUX control
  • 2 Power input ports with SMBus
    • 1 AD & IO port
    • 2 additional analog input
    • 1 PWM/Capture input
    • 2 Dedicated debug and GPIO lines

Included

Standard Set

  • Pixhawk 6X Flight Controller Module
  • Pixhawk Standard Base / Pixhawk Mini Base
  • PM02D Power Module
  • Cable Set

Standard Set + M10 GPS

  • Pixhawk 6X Flight Controller Module
  • Pixhawk Standard Base / Pixhawk Mini Base
  • PM02D Power Module
  • Cable Set
  • M10 GPS

Resources

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 64333069746

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 93 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kindle Customer
Louisville, US
★★★★★ 4
Deceptive Advertising
There's a little bit of false advertising going on here unless you thoroughly read the description. There are three balls in the picture, but you are only purchasing two. Always read the whole description before buying!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 22, 2025
J
Verified Purchase
JULIE A. WENTE
Waukegan, US
★★★★★ 5
Great for indoor fun!
Dog loves it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 11, 2026
J
Verified Purchase
junebugged
Battle Creek, US
★★★★★ 1
Not the same rubber.
I just received these today. I already have two of the same size direct from the local pet store. The one thing I liked about them that made me want to buy more - my 13lb dog could chew on them all night and never leave a mark. The red one I received was as expected. The blue one I received was not made out of the same rubber. It was softer. We played catch a few times and it didn’t bounce the same. I looked away for 5 minutes and she had it already starting to shred. Not sure what happened but 1 of the 2 balls I was sent was not up to par, possibly defective.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2024
H
Verified Purchase
Honest Reviews by Page
Lowell, US
★★★★★ 5
Leave your skin looking radiant!
I’ve been using the Vaseline Illuminate Me Body Butter & Oil, and overall I really like it—it feels like a simple but effective everyday glow product. The first thing I noticed is how soft and lightweight the body butter is. It melts into the skin easily without feeling heavy or greasy, and it leaves my skin feeling smooth and well moisturized. The hydration is definitely noticeable, especially on dry areas like elbows and legs. I also love the subtle glow it gives. It’s not glittery or over-the-top—it’s more of a natural, healthy-looking sheen that makes your skin look radiant and refreshed. The body oil adds a nice finishing touch if you want a bit more shine, especially for nights out or warmer weather. The scent is light and clean, which I appreciate because it doesn’t overpower perfumes or other body care products. It just gives that fresh, “put together” feeling after applying. Another thing I like is that it layers well. You can use the butter alone for everyday moisture or pair it with the oil for a more luminous, highlighted look. Overall, this is a great body care duo if you want hydration plus a soft glow. It’s not overly fancy, but it does exactly what it promises and leaves your skin looking healthy, smooth, and radiant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
Q
Verified Purchase
QUEENIE Dee
Alexandria, US
★★★★★ 5
Great combo. Vaseline never disappoints
Love this set use either alone or as a combo. Smell great and shine on girls 👧🏽cranky slimy smooth will hve you golden with the oil and mini glitter specks
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2025

recommand products