Treated Softwood Railway Sleeper 250mm x 125mm x 2.4m

Treated Softwood Railway Sleeper 250mm x 125mm x 2.4mTreated softwood railway sleepers, 250mm x 125mm x 2. 4m, are a reliable choice for raised garden beds, retaining walls, and structural landscaping. New timber, not reclaimed, pressure treated and planed to a consistent square edge for straightforward installation on any outdoor project. Specifications Property Detail Material Softwood Treatment Pressure treated for rot and decay resistance Finish Planed, square edged Nominal Size 250mm x 125mm Length

Treated softwood railway sleepers, 250mm x 125mm x 2.4m, are a reliable choice for raised garden beds, retaining walls, and structural landscaping. New timber, not reclaimed, pressure treated and planed to a consistent square edge for straightforward installation on any outdoor project.

Specifications

What it's used for

• Raised vegetable and flower beds, providing a clean, defined border that holds soil in place over multiple seasons
• Garden retaining walls and terracing on sloped ground, where the 125mm depth gives solid structural support
• Garden steps and pathways, stacked or set into the ground for a stable, long-lasting surface
• Seating features and large garden borders as part of hard landscaping schemes, for both trade and domestic projects

Fitting and handling

These sleepers can be cut with a standard hand saw or circular saw and fixed using timber screws, coach bolts, or rebar driven vertically through stacked courses. Because they arrive planed and square-edged, courses stack flush without needing to pack or shim, which saves time on site. Store flat on a level surface clear of the ground until installation, and allow any surface moisture to dry before applying any additional sealant or stain if desired.

FAQ

Are these sleepers safe to use in a raised vegetable bed?

Yes. These sleepers use modern pressure treatment rather than the creosote found in old reclaimed railway sleepers. Current timber preservatives approved for use in the UK are considered suitable for contact with soil in garden and landscaping applications, including raised food-growing beds, when treatment has fully dried.

How heavy is a 250mm x 125mm x 2.4m sleeper?

A sleeper of this size typically weighs in the region of 30 to 40kg depending on moisture content at the time of delivery. Having a second pair of hands available for handling and positioning is strongly recommended, particularly when building retaining walls or steps.

Can I cut these sleepers to a shorter length on site?

Yes. Treated softwood sleepers of this section can be cross-cut using a circular saw or hand saw. If you cut them, it is good practice to apply a brush-on end-grain preservative to the cut faces to maintain protection at those exposed surfaces.

Nottage Timber Merchants supplies treated softwood sleepers to trade and retail customers across South Wales, with next-day delivery available to the Bridgend area. View our full range in the railway sleepers collection for additional sizes and options.