Newmar Ra-1 Cable Feed-thru 0.1-0.25 Inch Cable Diameter
SKU: 59909162465

Newmar Ra-1 Cable Feed-thru 0.1-0.25 Inch Cable Diameter

$50.20 $55.78
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Newmar Ra-1 Cable Feed-thru 0.1-0.25 Inch Cable DiameterRA Series Right Angle Waterproof Feed Thru Fittings Route cables at 90 through vertical and horizontal surfaces with wall hugging low profile design that keeps cable secured close to the surface reducing intrusion with personnel or other equipment cables. Molded of nylon, the Sculpted shape has no sharp edges and provides radiused 90 feed thru bend in cables without damage. Easy installation: slide silicone compression rings on cable, mount base piece

RA Series Right Angle Waterproof Feed-Thru Fittings

Route cables at 90° through vertical and horizontal surfaces with wall
hugging low profile design that keeps cable secured close to the surface reducing intrusion with personnel or other equipment / cables.

Molded of nylon, the Sculpted shape has no sharp edges and provides
radiused 90° feed-thru bend in cables without damage.

Easy installation: slide silicone compression rings on cable, mount base piece with waterproof gasket then attach sealing end cap to create an IP 65 waterproof seal. Note cable must be routed without end connector attached.

Three models to accommodate wide range of cable diameters.

Model Cable Diameter Range (Inches) Dimensions (Inches)
RA-1 0.1 - 0.25 2.17 x 1.65 x 0.63
RA-2 0.27 - 0.35 3.23 x 2.44 x 0.95
RA-3 0.39 - 0.47 3.23 x 2.44 x 0.95
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59909162465

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 427 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cody Craddock
Cuba, US
★★★★★ 5
Cheap Replacement
These are an easy replacement for anyone who owns a BMW m52/m54 engine that has PCV issues. My car was burning about 1 quart every 1,000 miles. The parts are direct fit and install fairly easy. If there is resistance, lube the hole or o-ring up with some grease and it will slide in easier. Took me about 2 hours start to finish. My mechanic recommended that I remove the intake manifold to do the job. I don’t see how you could do it without removing the intake manifold. These parts probably won’t last as long as true BMW parts but on a 20 year old car I don’t see the benefit in using genuine BMW parts. Cheap stuff will suffice; worst case it doesn’t last quite as long.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2021
S
Verified Purchase
Slickster
Belleville, US
★★★★★ 4
NOT TOO HARD TO INSTALL...
This CCV kit seems adequate. People say that because the hoses supplied with these kits are more brittle than the genuine BMW parts, these are tough to install... But they're really not. The ends on these hoses SWIVEL and you can sort of eyeball which way you need the fitting to be pointing BEFORE you put them on your manifold... They swivel, but they're tight and it takes a little force to turn them. ALSO, a little dab of silicone gel or a spray of silicone out of the can, into the fittings on these makes a world of difference when clicking them on... For the price, I highly recommend the kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2025
P
Verified Purchase
Philip Giuliano
San Leandro, US
★★★★★ 5
Great value
I recently had to replace the starter on my 2001 325i E46 with about 150k miles. While I had the intake off, I figured it would be a good time to replace the CCV because I was unsure if it had ever been done. My old CCV literally fell apart as I removed it, so I'm glad I replaced it. The new parts were a little tough to put together, but overall came together well enough. A lot can be forgiven for the price. I would recommend assembling the system before installing in your vehicle to get a good sense of how it all goes together and to hopefully loosen up the fittings just a tad before installation. 50skid on youtube has a great DIY for doing this job. I only finished this job yesterday, but my car has been running great. I can't yet confirm, but this may have solved my running lean problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2023
C
Verified Purchase
Craig Randall
Chelsea, US
★★★★★ 3
Cheap plastic parts -- good fit
They are what they are: Cheap plastic parts. They fit, but long-term durability will be a challenge. Probably will buy from FCP Euro going forward (and just did for a fuel line replacement).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2024
R
Verified Purchase
ruben rodriguez
Houston, US
★★★★★ 5
2001 325i
Great quality fits perfect durable. no more leaks works great. Great price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 29, 2024

recommand products

4-Tier Storage Rack with Steel Frame, 120 cm High, Rustic Brown and Black
171.00
3x 35L Australian Made Premium Underbed Plastic Storage Tub Under Bed Box Large
77.00
.hack GU Redemption - Playstation 2
29.99
Warriors of Might and Magic - Playstation
14.99
OKI C650DN Black Toner
205.50