Crescent 12 Piece Screw Point Spade Drill Bit Set Impact Rated Wood Boring Kit Quick Change Hex Shank Self Feed Paddle Bits

Experience Extreme Speed and Clean Cuts in Wood

Revolutionize your drilling efficiency with the Crescent 12-Piece Screw Point Spade Drill Bit Set (CDSPSET-12). Engineered for the demanding needs of electricians, plumbers, and general contractors, these bits feature a high-performance screw tip that self-feeds into the wood, pulling the bit through with minimal effort and delivering drilling speeds up to 15x faster than standard spade bits. Whether you are roughing in wiring or framing a structure, the triple-sharpened high-speed steel construction ensures smooth, clean holes every time.

Durability meets versatility in this comprehensive kit. Each bit is designed with reinforced cutting spurs capable of tearing through occasional nails without compromising the cutting edge. The optimized contoured paddle design ejects chips rapidly to prevent clogging, while the impact-rated 1/4-inch hex shank features a specialized torsion zone. This zone absorbs high torque peaks, providing increased shank stability and endurance whether you are using a standard drill or a high-torque impact driver.

Key Features

• Maximum Speed: Screw point tip self-feeds into material for drilling up to 15x faster than standard spade bits.
• Impact Ready: Designed with a torsion zone to withstand the high torque of impact drivers and drills.
• Nail Durability: Reinforced cutting spurs allow the bit to cut through wood embedded with nails.
• Efficient Chip Removal: Contoured paddle shape clears debris quickly to prevent bogging down or overheating.
• Universal Fit: 1/4" quick-release hex shank ensures compatibility with all quick-change adapters and chucks.
• Clean Finish: Triple-sharpened edges provide a smooth hole entry and exit for professional results.

What's Included

• (1) 1/4" x 6" Screw Point Spade Bit
• (1) 3/8" x 6" Screw Point Spade Bit
• (1) 1/2" x 6" Screw Point Spade Bit
• (1) 9/16" x 6" Screw Point Spade Bit
• (1) 5/8" x 6" Screw Point Spade Bit
• (1) 11/16" x 6" Screw Point Spade Bit
• (1) 3/4" x 6" Screw Point Spade Bit
• (1) 13/16" x 6" Screw Point Spade Bit
• (1) 7/8" x 6" Screw Point Spade Bit
• (1) 1" x 6" Screw Point Spade Bit
• (1) 1-1/8" x 6" Screw Point Spade Bit
• (1) 1-1/4" x 6" Screw Point Spade Bit

Specifications

Pro-Tip: To achieve a perfectly clean exit hole without splintering ("blowout"), drill until the threaded screw tip just barely breaks through the back of the wood. Stop the drill, flip the board over, and place the tip of the bit into the small exit hole to finish drilling from the opposite side.