Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 4 - Jul 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Auto Ventshade (AVS) 25033 - Bugflector II Stone/Bug DeflectorThe AVS Bugflector II is designed to protect and complement the contours of your vehicle's hood keeping it looking showroom new. This custom molded hood shield is made in the USA and precision engineered to fit your vehicle perfectly. This hood shield's high profile is aerodynamically efficient and provides excellent protection as stones and other debris ricochet away from your hood, fender and windshield. The shield's durable impact modified acrylic
The AVS Bugflector II® is designed to protect and complement the contours of your vehicle's hood — keeping it looking showroom new. This custom-molded hood shield is made in the USA and precision-engineered to fit your vehicle perfectly. This hood shield's high-profile is aerodynamically efficient and provides excellent protection as stones and other debris ricochet away from your hood, fender and windshield. The shield's durable impact-modified acrylic material makes this accessory wear-and-tear resistant. Car wash safe, easy to clean and wax your hood. Your vehicle's Bugflector II can remain on the hood and is car wash safe. The accessory can also be easily removed from the hood for simple cleaning. The set includes installation instructions and any required hardware. Easy to install, no drilling or special hardware required. The AVS Bugflector II offers you a simple, no-drill installation process easily completed at home in 10 minutes or less. The hood shield is mounted using double-sided 3M tape or mechanical fasteners (depending upon the vehicle). In order to protect the hood paint from rubbing, the set includes several rubber bumpers applied to the hood during the installation.
Bug Shield; Bugflector II; Wrap-Around; Smoke; Acrylic
Features & Benefits
- Wrap Around Design For Sleek Aero Dynamic Appear
- Custom-Molded, Rugged, Durable Acrylic
- Car Wash Safe
- Provides Maximum Hood, Fender, And Windshield Protection
- Off-The-Hood Design Allows For Easy Cleaning And Waxing
- Mounted Using Double-Sided 3M Tape Or Mechanical Fasteners (Depending Upon The Vehicle)
- Limited Lifetime Warranty
Attributes
- Mounting Type: Raised Mount
- Wrap-Around: Yes
- Profile Style: High
- Color/ Finish: Smoke
- Material: Acrylic
- Hood Or Fender Protector: Hood And Fender
- Installation Location: In Front Of The Grille
- Installation Type: Screw-On
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
- Color Group: Smoke
Specifications:
| Description_DEF | Hood Deflector |
| Description_DES | Bugflector II Hood Shield; Smoke |
| Description_EXT | Bugflector II Stone/Bug Deflector |
| Description_INV | AVS - BUGFLECTOR II |
| Description_SHO | BUGFLECTOR II |
| Description_MKT | No one enjoys scrubbing off stubborn, dried-up bug guts after a long road trip. That's where the Bug?ector II comes in. The high-pro?le wrap-around design provides maximum protection from all bugs, big and small, while its high-profile design allows for easy cleaning and waxing. Made from durable impact-resistant acrylic, the Bug?ector II can stand up to everything from car washes and bugs to the wear and tear of daily driving or going off-road. Custom-molded to ?t your vehicle's exact year, make, and model and contoured to ?t the curves of your hood. Available in dark smoke ?nish. Proudly made in the USA with global materials. |
| Description_FAB | Built to give the greatest amount of deflect to insects of any size at any speed with a high-profile design. |
| Description_FAB | Custom-molded to match the contours of your vehicle's hood. Instantly adds a custom look to your ride. |
| Description_FAB | Built to last a lifetime. Made from ultra-tough tough Dura-Flex® 2000 TPO material. Available in a dark smoke ?nish. |
| Description_FAB | Its full-height, wrap-around design protects your vehicle's paint from the hazards of the road. |
| Description_FAB | Installation is a breeze; no drilling or special hardware required -- attach with the included 3M automotive-grade tape or mechanical fasteners. |
| Description_FAB | Made in the USA with global materials. |
| Description_ASM | 2004-2007 Ford F-150, 2008 Ford F-150 FX2, 2008 Ford F-150 FX4, 2008 Ford F-150 Harley-Davidson Edition, 2008 Ford F-150 King Ranch, 2008 Ford F-150 Lariat, 2008 Ford F-150 Limited, 2008 Ford F-150 STX, 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION, 2008 Ford F-150 XL, 2008 Ford F-150 XLT, 2006-2008 Lincoln Mark LT |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1949 reviews
Sort
Product Reviews
★★★★★ 5
A great printer with lower pricing
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am quite happy with my ET-4800 purchase. From wirelessly connecting to my Mac to software installation to adding the ink, it was easy to set up. I feel you can't go wrong with this level of ink capacity. It holds so much ink without the bother and added expense of frequently replacing cartridges. I will never go back to a cartridge machine. I don't care who makes it! I've used my printer several times so far, and each time it has done a great job by giving me the colors and clarity that I expected.
This is the first printer that I've owned that wasn't a front-feeder. I wasn't sure how I would like that, but I've found that holding the paper straight and then dropping it into the slot rather than placing it, gives the best result for paper alignment. For my needs, I have only used it one sheet of paper at a time. So if you are wanting to load several sheets at once, your loading experience may be different from mine. But just make sure that you do not load more than 100 sheets at a time, per the manufacturer's instructions. Also, be sure that the movable paper guides are in the correct spots for the size of paper being used, without any buckling.
To date, I have not used the scanner, but it is definitely a feature that I did not want to be without, so I'm looking forward to using it. The display window, though small, is simple to follow along with, and I appreciate that the angle of the keypad can be adjusted. Working with the Epson Smart Panel app gives a bit more flexibility, particularly if you're not right next to your printer and want to check the ink levels or start a printing job. To use the app, be sure that you turn on your printer first and that both the printer and your device are set to the same wi-fi, so that the app can find your printer and you can begin operating it from afar. Once inside of the app, be sure to check out the "Other Features Menu" from the app's homescreen. There is a link to another Epson app that can be used to boost your creativity and streamline layouts for collages, and a colorful guide full of project ideas that outline everything that you need for each project and how to execute them. There's even a feature for sharing what you've scanned and submitting it as an assignment. This is something that you'd want to read more about to see if it is an applicable and helpful addition for you. You can use the search term, "google classroom in epson smart panel app," to find out more.
There is only one downside that I have found at this point. The pull-out paper catching tray in the front feels flimsy. It seems out of place on an otherwise sturdy machine. But so far, I've had no problems with it. I just take my time pulling it out, flipping down the end, folding it back up, and pushing the tray back in. I figure if I baby it a bit, then all should be well. Overall, I really like the Epson ET-4800 as much as my ET-5170. I feel it performs well at an acceptable price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 26, 2025
★★★★★ 5
Excellent product for the price.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I have had many, many printers over the many years at the business and for home. I honestly think this is the best value for what I need. The eco tank is fabulous. This is the first printer I have purchased with the ecotank. So much better than the cartridges. The quality is good and it was easy to setup and put on the network. I did wait a few months before writing this review to truly test it out and write a fair review. I am pleased. I have had Epson products in the past and do appreciate their quality and affordability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk!
Built cheaply.
Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper.
If you have a piece of paper that has a fold in it, forget about it. That will never feed through.
I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides.
It took 23 minutes to get done. Should not have taken 2.
The last time I used it same issues but less sheets.
The paper is SO TIGHT in the feed section it is hitting BOTH walls.
You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly.
While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!)
Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds.
Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going).
Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit!
So much for a 5 year Warranty.
Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022.
Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm .
As they pass you along the ranks you have to repeat EVERYTHING all over again.
As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out.
Just PLOP!
Other issues while I am at it, the Picture quality is "OK" nothing special.
I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff.
The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's).
Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it.
I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC.
I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.)
The panel function is anything but user friendly.
Firmware Updates, if not done, will prevent usage until done.
You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined.
Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded.
The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges.
The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP?
But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low.
They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon.
You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist.
Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking.
Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks.
Features,
* The printer dues Dual-Sided Print - Great for zines.
* It has fax capability, but we do not have a landline, so that will not be used.
* It does copying, with a document feeder or you can lift the feeder and place the document on the glass.
* I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document.
* Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do.
Print Alignment. I did this test but the printer heads did not require any alignment.
During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed.
The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer.
Negatives.
The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this.
So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up.
So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards.
As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on.
One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025