Powerus PW100A 14.4V POWERSUPPLY

Powerus PW100A 14.4V POWERSUPPLYTHE POWERUS PW100A POWER SUPPLY IS IDEAL FOR CHARGING MAINTAINING BIG BATTERY BANKS. IT CAN ALSO BE USED AS A BENCH POWER SUPPLY FOR TESTING AMPLIFIERS . IT IS ALSO IDEAL FOR THE PEOPLE WHO DO ALOT OF INDOORS CAR SHOWS AND CANNOT HAVE THE CAR RUNNING WHILE DEMOING THEIR SYSTEM. THIS POWER SUPPLY IN THIS INSTANCE WOULD ACT AS YOUR ALTERNATOR. A MINIMUM OF A UK 230V 13A SUPPLY WOULD BE NEEDED. THE OUTPUT IS ADJUSTABLE FROM 12V 14. 5VDC WITH A VISUAL

THE POWERUS PW100A POWER SUPPLY IS IDEAL FOR CHARGING/MAINTAINING BIG BATTERY BANKS.  IT CAN ALSO BE USED AS A BENCH POWER SUPPLY FOR TESTING AMPLIFIERS . IT IS ALSO IDEAL FOR THE PEOPLE WHO DO ALOT OF INDOORS CAR SHOWS AND CANNOT HAVE THE CAR RUNNING WHILE DEMOING THEIR SYSTEM.

THIS POWER SUPPLY IN THIS INSTANCE WOULD ACT AS YOUR ALTERNATOR.

A MINIMUM OF A UK 230V 13A SUPPLY WOULD BE NEEDED.

THE OUTPUT IS ADJUSTABLE FROM 12V-14.5VDC WITH A VISUAL DISPLAY OF VOLTAGE IN AND OUT AS WELL AS A BUILT IN AMMETER.

FULL POWER OF 100A IS AT 14,4v dc

Technical Specifications:
Supply Voltage / Power Supply Bi-Volt Auto 70Vac ~ 250Vac
Consumption at Rest / Consumption at Rest 0.7A

Cons. Input 220V Output 14.4V 200A-  11A AC                           

Variable Output Voltage                                                     12V ~ 14.5V (1%)
Maximum Output Current 14.4V / Max. Output Current 14.4V 0A ~ 200A (1%)
Max. Output Power 14.4V / Max. Output Power 1440W
Input Cable / Input Cable 3x2.5mm² Input
Fuse (Internal) / Fuse Input (Internal)                                                                       30A
Output Cable / Output Cable 25mm²
Dimensions / Dimensions (DxHxL) mm 70x280x200
Weight without Packaging / Weight if Packing 3.5Kg


Installation 

The powersupply comes with an 3m mains cable. 

Please don't keep this coiled up while using. Lay the cable out to dissipate heat. If you need to extend using an extension lead it must be a minimum of 2.5mm 3 core cable to carry the current over the distance. 

A minimum of 25mm cable (4 gauge) is needed on the output side and fused acording as you would in any installation

You can run amps directly off this supply if it pulls less than 40-60a. If the amp pulls more it's recommended a battery is connected to buffer the supply.