kennametal f medium venturi nozzle

kennametal f medium venturi nozzleThe Kennametal F Series is a medium venturi blast nozzle with a boron carbide liner, steel jacket and 1 1 4 NPSM thread. Thanks to the boron carbide liner, this nozzle is particularly suitable for intensive blasting work with aggressive abrasives, such as aluminium oxide and selected mineral abrasives. In these types of applications, boron carbide generally has a much longer service life than tungsten carbide. As a result, despite the higher purchase

The Kennametal F Series is a medium venturi blast nozzle with a boron carbide liner, steel jacket and 1-1/4″ NPSM thread. Thanks to the boron carbide liner, this nozzle is particularly suitable for intensive blasting work with aggressive abrasives, such as aluminium oxide and selected mineral abrasives.

In these types of applications, boron carbide generally has a much longer service life than tungsten carbide. As a result, despite the higher purchase price, this nozzle can be more economical in intensive use. The nozzle maintains good blasting performance for a long time and contributes to efficient air and abrasive consumption.

The medium venturi profile is intended for use at short working distances, up to approximately 450 mm from the surface. The F Series is suitable for blast hoses with an internal diameter of 25 mm. The steel construction provides a robust design for demanding working conditions.

Boron carbide is more brittle than tungsten carbide. Handle the nozzle carefully and avoid rough handling or dropping it, to prevent cracking in the liner.

Features

• Medium venturi blast nozzle for short working distances
• Boron carbide liner for long service life with aggressive abrasives
• Steel jacket and steel thread
• Suitable for blast hoses with an internal diameter of 25 mm
• Most effective within approximately 450 mm of the surface being blasted
• Thread: 1-1/4″ NPSM

Available Sizes and Lengths
Available in bore sizes #3 to #8. All versions have a length of 105 mm.

Note: this nozzle has a 1-1/4″ NPSM thread and does not fit a standard 50 mm nozzle holder. Please check whether your nozzle holder is suitable for this thread.