Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek F405-VTOL Flight ControllerSpecifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688 P Baro: SPL06 001 OSD: AT7456E Blackbox: MicroSD card slot 6x UARTs, 1x Softserial_Tx option(INAV) 12x PWM outputs 1x I2C 4x ADC (VBAT, Current, RSSI, Airspeed) 1x spare PINIO USB Beep Extender with Type C(USB2. 0) Built in inverter on UART2 RX for SBUS input Switchable Dual Camera Input FC Firmware ArduPilot: MatekF405 TE INAV: MATEKF405TE_SD (INAV 5. 0 or newer) PDB Input voltage
Specifications
- MCU: STM32F405RGT6, 168MHz , 1MB Flash
- IMU: ICM42688-P
- Baro: SPL06-001
- OSD: AT7456E
- Blackbox: MicroSD card slot
- 6x UARTs, 1x Softserial_Tx option(INAV)
- 12x PWM outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- 1x spare PINIO
- USB/Beep Extender with Type-C(USB2.0)
- Built in inverter on UART2-RX for SBUS input
- Switchable Dual Camera Input
FC Firmware
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE_SD (INAV 5.0 or newer)
PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- Sense resistor: 100A continuous, 220A peak
- 5x ESC power pads, total 100A continuous
- Support continuous load of up to 100A on ESC pad near the current sensor resistor
- Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
- Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, 10A Peak
- for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 25 x 25mm-Φ2mm, 35 x 35mm- Φ4mm
- Dimensions: 45 x 42 x 15mm
- Weight: 25g w/ USB/buzzer adapter
Included
- 1x F405-VTOL
- 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
- 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- Dupont 2.54 pins (Board is shipped unsoldered)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 2154 reviews
Sort
Product Reviews
★★★★★ 5
Nice Phone mount
Great phone mount—stable, easy to use, and gets the job done!
I’ve been using this phone mount for a few weeks now, and it’s exceeded my expectations. It holds my phone securely, even on bumpy roads, and the adjustable arm makes it super easy to get the right angle. Installation was a breeze—took less than 2 minutes. The grip is strong without scratching the phone, and it feels sturdy overall. Highly recommend if you’re looking for a reliable mount!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 2, 2025
★★★★★ 5
Perfect Phone Mount: Secure, Versatile, and Easy to Install!
This phone mount has truly exceeded my expectations! It’s incredibly easy to install and holds my phone securely in place, providing total peace of mind while driving. What really sets this mount apart is its impressive versatility—I've never seen anything quite like it. The base attaches firmly to the air vent, and the adjustable arm allows me to position my phone precisely where I want it, with the freedom to tilt it up, down, left, or right. Plus, it doesn’t interfere with air flow from the AC, which is a huge bonus.
Although my wife's phone case isn't MagSafe-compatible, the included metal ring works seamlessly with it, and my MagSafe case connects just as smoothly.
I couldn’t recommend this product more—it’s been an absolute game-changer for us! This is a personal purchase, and I’m thrilled with it. I’ll be sure to update if anything changes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 12, 2024
★★★★★ 5
Secure and great fit
I gave this product a chance and it did not disappoint! I did not need to read any instructions for installation and was able to quickly and easily figure it out. Installation takes less than 5 minutes. Just align the mount to the top corner of your tesla screen and turn the dial to adjust the tightness. Once tightness is set, just test to see if it’s really fitted by wiggling it around to check for looseness. I like the fact that I can adjust the angles of the mount easily. My phone can be angles to be on top or side of the Tesla screen. When driving, my phone does not shake one bit. When it’s time to remove my phone, just give it a quick pull to detach and that’s it. The build quality is also very nice and I like the design of it overall. I think it’s a well thought out product. Definitely would recommend to friends and family with Teslas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 28, 2025
★★★★★ 4
Good mount but…
This is a solid mount for the Tesla monitor but the mounting points on the corner of screen caused my screen protector to bubble up. I had to return it unfortunately.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 4, 2026
★★★★★ 5
Tesla 😋😉 jeep phone mount.
Bought this to go in my jeep, perfectly attached to the corner of the screen of the screen, the only down side is since my screen raises and lowers over time with the vibration of the jeep it does make the screen slide down. But the magnet holds the phone very well as long as it is aligned properly to the back of the phone. I know it say tesla mount but my choice of smart stereo for my jeep is not a flush mount, it sticks out and has a cd player in the deck. As well the screen raises and lowers for access to to the cd player. So perfect for my jeep.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
recommand products
Westin 2006-2011 Suzuki Grand Vitra Wade Slim Wind Deflector 4pc - Smoke - 72-86484
73.83
VIM Tools SFP6-312 5/16" Flat Tip, One Piece Impact Driver, 3/8" Square Drive
12.40
Westin 1988-1998 Chevrolet/GMC PickUp Full Size Short Bed Wade Bedcaps Smooth w/Holes - Black - 72-41111
100.58
VIM Tools V523 Socket Rack Set, 1 Each 1/4", 3/8", 1/2"
79.67
Westin 1980-1996 Ford PickUp Full Size Long Bed Wade Bedcaps Smooth w/Holes - Black - 72-41601
100.58