Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATS 3039022188 Towing Edition Valve Body 96-98 Dodge 5.9L Cummins 47REThe throttle valves (TV Valve) in a transmission's valve body control shift timing between gears through the constriction of hydraulic fluid. The TV valve also controls the line pressure required to clamp the clutch pack and band inside the transmission. Until now these valves have been known to have issues sticking inside the bore in the valve body, or wearing out due to friction, which causes malfunction and improper shifts. Despite all of the
The throttle valves (TV Valve) in a transmission's valve body control shift timing between gears through the constriction of hydraulic fluid. The TV valve also controls the line pressure required to clamp the clutch pack and band inside the transmission. Until now these valves have been known to have issues sticking inside the bore in the valve body, or wearing out due to friction, which causes malfunction and improper shifts.Despite all of the changes made in the past to the material from which the valve is made, the bore itself in the valve will wear and prevent proper movement of the valve. Especially in the Dodge automatic transmission, Dodge manufactures the stock valve body from a very cheap mystery material that is very soft and prone to wearing out.
ATS has designed an innovative solution in their Dodge Ram transmissions using a unique 'Hydro-balanced Valve and Sleeve'. By altering both the shape and material of the valve itself, as well as placing a hardened sleeve in the valve body's bore the sticking issues are prevented. The valves in the ATS Valve Body perform extremely smooth and operate as intended after extended use. Utilizing this new design valve and sleeve assembly allows the hydraulic flow to be altered providing a more aggressive line pressure slope while providing quality shifts and torque converter clutch engagement. When using the stock TV valve or oversized TV valves increased line pressure caused hard and abrupt shifts.
The concept used by ATS is similar to that of a piston sleeve in an engine. By using high quality, hardened material, the lifespan of the moving component is greatly increased and the issue of a worn bore is eliminated. This technique further raises the functionality and quality level of the ATS Valve Body and Transmission system to an even higher level and is used in their Towing, Racing, and Stand-Alone-Programmable Valve Bodies.
FEATURES & BENEFITS:
- Proprietary Design Modifications
- Improved Shift Characteristics
- Optimized For Use With Exhaust Brake
- Increased Reliability
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 2055 reviews
Sort
Product Reviews
★★★★★ 5
Nice pipe shelves! Excellent quality!
Size: 28inch Tall (NOT included wood planks), Color: Black
I really like the fact that the pieces were already painted. I compared the cost of the unit to buying the pieces from the big box store and this was far more cost effective for me.
The installation went well and I ended up creating a template for installation. For the template, I measured the width of one of the flanges (part that mounts to the wall), cut a piece of material the same width. I found the center and drew a line down the middle. I then placed the section with top and bottom holes over the center line and then marked the other two holes.
I then drilled out the holes, put on wall and used level to plumb. I used small pilot drill bit to drill through the template into the wall.
One thing to note is that I did not use the included anchors instead opting for some from the big box store.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2020
★★★★★ 5
Well built and priced
Size: 42inch Tall (NOT included wood planks), Color: Black
I saw these on line and decided I could probably just build one on my own. After pricing the parts out at the local hardware store, it was almost the same price, and opted for the less hassle pre-fab online kit. The material is well made, same as the hardware store, except the threads are shorter for easier assembly, and its painted for a cleaner look. I bought the 12"Dx42"L kit, and although I knew the measurements, it was a lot more massive than it looked in the picture. An 8' or 10"x 24"L kit would have fit my needs better. I only assembled 2 of the 3 sections, and will use the single section leftover for another shelf elsewhere, so it wasn't a problem. I'm happy with the end result and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2020
★★★★★ 5
So beautiful!
Size: 42inch Tall (NOT included wood planks), Color: Black, Size: 42inch Tall (NOT included wood planks), Color: Black
The poles are very sturdy. The order doesn’t come with wood but I only spent ~$15-20 on the wood and stain needed to shelve the poles. The only complaint I have is it was hard to install; mostly due to my lack of experience. It took most of the day to install and stain and cute the shelves. The poles weren’t completely flush to the wall and I couldn’t figure it out for the life of me. I love the way these turned out and I know these shelves will be coming with me to the next home I have. 10/10 would recommend, even with the hard installation. SO worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 26, 2019
★★★★★ 5
Fantastic for furniture making
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Frankly, I didn't know what to expect... But these turned out to be exactly what I was looking and hoping for.
These table legs were so easy to assemble. They come with adjustable feet so you can have a level table no matter your tabletop shape or floor situation. Assembly is done with a simple Allen key. Printed instructions are included with simple diagrams that are so easy to follow.
Also, the seller provided all the hardware needed and more! They provided multiple black screws of different sizes that fit through the top holes of the legs, making it so easy to screw the leg base into the table top (use an electric drill with a Philips head for that). I had zero issues with any of the hardware provided.
The base has a nice smooth black powder coat application on the metal. Shipping was so quick too.
Seriously, if you are looking for a low cost, easy to assemble, good looking, and adjustable end table base, get this. I ended up making plant stands with these using some tree slices I had as you can see in my photo.
10/10 highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 3, 2026
★★★★★ 5
Great value, sturdy product
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Made a custom built 24" round resin pour table, and this worked great for the base, looks good too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
recommand products
LM - Jurassic XC (front only) - Charcoal Sweatshirt
26.00
2Pcs Eucalyptus Garland with Lights, Greenery Garland, Green Garland with Flowers, 5.9FT Artificial Faux Eucalyptus Leaves Vines for Table Mantle Home Wedding Party Indoor Outdoor Decor
55.48
Precedent Tank - Black
45.00
Nike: Ladies Dri-FIT Heather Polo (474455)
53.91
Precedent Tee - Black
49.00