SKU: 34943427247

ENDLESS RACING MONO4 FRONT PERFORMANCE BRAKE SYSTEM FOR VA SUBARU IMPREZA WRX STI

$2591.99 $2879.99
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ENDLESS RACING MONO4 FRONT PERFORMANCE BRAKE SYSTEM FOR VA SUBARU IMPREZA WRX STIENDLESS RACING MONO4 FRONT PERFORMANCE BRAKE SYSTEM FOR VA SUBARU IMPREZA WRX STI 4POT caliper version of forged and molded Monobloc Calipers. Conducting many tests in pursuit of reduced weight, durability, radiation, etc., Endless reviewed the shape of the details time and again before achieving perfection. They also enabled installation of wheels from 15 inches as well as increasing installable wheels. Specifications Weight : 2100g Size : 141mm x

ENDLESS RACING MONO4 FRONT PERFORMANCE BRAKE SYSTEM FOR VA SUBARU IMPREZA WRX STI

4POT caliper version of forged and molded Monobloc Calipers. Conducting many tests in pursuit of reduced weight, durability, radiation, etc., Endless reviewed the shape of the details time and again before achieving perfection. They also enabled installation of wheels from 15 inches as well as increasing installable wheels.

Specifications

  • Weight : 2100g
  • Size : 141mm x 72.5mm x 270mm
  • Compatible Rotor Diameter : φ300mm – φ355mm
  • Std Color of Kit : Racing Anodize
  • Std Compound for Kit : Type R / MX72 / MX72-Plus
  • Compatible Wheel Size : 15″

For racing, rally or street, Endless only uses the highest quality materials and design to achieve the best performance possible. These calipers will cope in the toughest of conditions without flexing or losing accuracy. Combine the calipers with RF650 Racing Super Fluid for optimum performance. Your pads will be applied and released with great precision and reliability.

FORGED MONOBLOC CALIPER BODY

Monobloc Calipers forged and molded through several thousand tons of pressure. 4 years after its conception and 1 year after the completed prototype it was entered into test races repeatedly and changed its specifications while also obtaining a body that is sufficiently light and hard to compete in races. The processing of the highly difficult piston cylinder was cleared using advanced special technology. The finished body was completed using an ultra-hard anodized aluminum. It is the final product of the technology created by Endless and its “never-ending challenge” as it continues to focus on quality forging.

“E-SLIT” DOUBLE SHAVING EFFECT

The long slit which draws gentle curves and the E slit which runs above the long slit are what make E-Slit Rotor impressive. The pad is constantly kept in optimal shape through the double shading effect demonstrated by the long slit, which gently carves the pad, and the E Slit, which gives strong brake force, providing further improvement of brake force. When the long slit on the rotor surface side disappears and the letter E floats up it is about time for replacement.

Also, even during the period of use, the brake rotor may be damaged due to aging deterioration such as rust and corrosion, so it is recommended to replace it at least once every two years.

Specifications

  • Material : Steel with Special Carbon
  • 1-Piece Design
  • Slit Shape : E-Slit
  • Special Heat Treatment

E-Slit

  • The E-Slit rotor consists of the narrow curved slit incorporated with 4 smaller E-Slits. The smoother shaving of the pad by the long curved slit and the increased friction provided by the E-Slits maintain optimal brake pad condition at all times. The rotor material consists of a special carbon blend, an Endless original technology, facilitating stable mu-levels, decreasing heat cracks and extracting 100% of the brake pads performance. Slits are designed for optimal shaving.

Cost Effective, and More On So Many Levels

  • Endless Steel discs are more cost effective, and offer a wider range of performance options. Many drivers and racing teams prefer the feel and characteristics of Endless steel discs.

Special Heat Treatment Process

  • With prolonged hard driving, the rotor surface will expand and contract due to heat, causing fine cracks (heat cracks), and you will not be able to obtain appropriate friction. To prevent this, special heat treatment was performed in advance to stabilize the components of the rotor itself and significantly reduce heat cracks during hard driving. As a result, the life of the rotor has been extended, and it has become possible to use it for a long time with peace of mind.

Blue Rotor Hat Finish

  • The bell hat part is painted blue to aid in preventing corrosion resistance and also can be expected to have a dress-up effect.

ULTRA-HARD ALUMITE CALIPER BODY

Ultra-hard alumite is used for the caliper body of our monoblock series. A tough ram coat is used for the rotor bell housing. This makes it possible to significantly delay the discoloration of alumite even when used under high temperature conditions when driving on a circuit.

HARD ANODIZED FINISH

The finish is a hard anodizing, which is the preference under track conditions. When raw aluminum reacts with the oxygen in the air, a hard surface film develops on aluminum which prevents further degradation. The process is called oxidation, and you can think of it like rust. The anodizing process leverages this natural phenomenon, and takes it a step further to produce an extremely hard protective layer of aluminum oxide. The result is a finish that is far more appropriate for racetrack use. Anodizing creates a uniform surface that is much more abrasion resistant than paint or powder coat.

ABOUT BEDDING

Circuit-dedicated pads that emphasize high-temperature characteristics, in order to bring out the original performance, it is indispensable to perform the work called “bedding” in which heat is applied in advance before hard driving to make a hit.

Bedding is always done in the top categories SUPER GT, WRC and various races in Europe.

Before using semi-metal brake pads, proper bedding is required to stabilize high temperature performance and extend the life of the pads and rotors.

How to Bed

  • When driving on a circuit when a new product is installed, raise the rotor temperature to about 400 – 500° C while avoiding hard braking, and add atari. After that, if the temperature is lowered to 100° C or less by natural cooling, the process is completed.

KIT CONTENTS

  • Endless Racing Calipers (2)
  • Brake Pad Set
  • Caliper Mounting Brackets (2)
  • Large Diameter Brake Rotors (2) – 355mm x 32mm 2PC
  • Stainless Brake Lines (2)

FITMENT DETAILS

  • Fits Applied A / B / C

NOTES

  • It may not be possible to bring out the original performance of the brake pads when bedding in the rain. Bedding should be done in fine weather as much as possible.
  • Compatible wheels vary depending on the wheel brand and size.
  • This product uses an E-slit rotor.
  • Please note that there is no custom color setting for the Racing Monobloc series.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 34943427247

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1114 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
SAGG
Battle Creek, US
★★★★★ 5
Good Body Soap
Scent: Aquatic
Good aroma. Nice lather. I'd recommend this...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
D
Verified Purchase
Deebz
Port Orchard, US
★★★★★ 5
• Create a signature fragrance for a foaming dispenser
Scent: Palo Santo, Size: 16 Fl Oz (Pack of 2), Scent: Palo Santo, Size: 16 Fl Oz (Pack of 2)
One of the features that I enjoy about liquid soap is its ability to quickly refresh skin. This Palo Santo product is certainly one of the most unique offerings on the market; it is warm and pleasant, albeit a short-lasting fragrance as should be expected of any body wash. While most customers will consider using this product exclusively as a body wash, my preference is to enjoy it throughout the day as a hand and face refreshment. Use a foaming soap dispenser This product can be used as a daily hand and facial wash. Now, you might be thinking that this would be pretty inconvenient because the product is contained in a talI bottle with a flip-up top that can be both clumsy to use and takes up counter space. To address these problems, transfer the product into a small, foaming pump, counter top dispenser. Now I know what you’re thinking; how is this possible? This product has a viscosity similar to syrup. It will never pass through a foaming dispenser. And you would be correct in that critique; so don’t use it straight-up from the Cremo bottle. Instead, dilute the product with water. Since I’ve used this method before with other liquid soap products, I know that it will work consistently by following a few simple steps. The goal is to make a diluted solution of at least 90% warm water and 10% product, in other words a 9-to-1 dilution. Using a smaller ratio with too much product will likely jam the pumping mechanism because the product is too viscous to transit the foaming mechanism. How would this be done? Step 1. Select an empty foaming soap dispenser. The brand is not as important as long as you are able to fill it with water and soap product. Step 2. Fill the dispenser with warm water to reach about three inches from the top of the bottle. Step 3. Pour in Palo Santo to raise the water level to about one inch above the existing water line. Step 4. Cover the top of the dispenser with your palm and gently mix the product and water by rocking the bottle, or stir the product until it mixes with the water. I don’t recommend shaking the bottle. Shaking will result in a lot of soapy lather escaping the container before the pump top is reattached. Note: When filling the container, leave enough air space at the top of the dispenser for the stem and pump mechanism to be returned to the container. Overfilling just means that some product will escape when recapped. Step 5. After the top is reattached, prime the pump a few times and the foam mixture should smoothly leave the bottle. Photo One shows the water and Palo Santo mixture. As you can see, the mixture is transparent. The result is an easy to use hand and face foam wash. This pump spray approach means that the Cremo bottle can be stored away until a refill is needed. This process should work for every clear Cremo product. Create your signature fragrance The Palo Santo fragrance is unique, but its colorless appearance in a dispenser is not inviting. The product could use some color to make it more appealing and some zhoosh fragrance from another product. To accomplish this, add an extra body wash product that is both colorful and has a complementary fragrance to the original Palo Santo. All it takes is this addition to Step 3: Step 3-PLUS. Add about a quarter inch of another liquid soap to the container and mix it as in Step 4. The result is now a colorful mixture with a more expressive fragrance. Three different combinations In my first trial, Palo Santo was mixed with sage and cedar wood that added an attractive teal color (see photo 2). In the second trial Palo Santo was mixed with mint and rosemary making a blue combo (see photo 3). The third trial was a mixture of coconut and black pepper creating a purple mixture (see photo 4). Each of these combinations produced a complex blend of fragrances that would appeal to family and friends. Blend Palo Santo to your personal taste Palo Santo has a reputation for being a “mature” fragrance. Fair enough. But it does need to be—like Old Spice(y) or Hai Karate. Instead, it can be developed into a more chic and modern choice. By adding a dash of extra ingredients, you can design a blended Palo Santo fragrance that is both more complex and appealing. Certainly, with a little experimentation, you can also create a variety of mixtures that enhance Palo Santo and broaden the spectrum of your daily hand and face wash products. Just start with your favorite Cremo product and zhoosh-it-up.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 7, 2023
S
Verified Purchase
Scott
Battle Creek, US
★★★★★ 5
Screamo for Creamo! Update on Sage and Citrus and Cologne
Scent: Bourbon Oak, Size: 16 Fl Oz (Pack of 2)
So first off the product came exactly as depicted. The smell was good but not strong or offensive. It has a pleasing woodsy smell. The name says it all. The lather is not particularly big but that doesn’t define how clean you get. I think it cleaned me up very well with one caveat. My face is a little oily so I did purchase the Creamo face wash. The body wash really didn’t do the trick for my face which is somewhat oily. The bottle is reminiscent of the past and stylish. It overall is a great product. I just bought the Sage and Citrus body wash. This is a great all season body wash with a more contemporary smell. It’s lighter than the Bourbon and Oak with, as stated, a citrus smell tempered with the earthy sage. Again it does not clean my oily face but I use the Creamo face wash and it does just fine. The rest of my body feels clean and the scent is light and not overpowering. Between both products I also use the shaving cream. I enjoy the original scent. I tried the Bourbon scent with the Bourbon and Oak body wash and felt it was a little overpowering. On a good note I combined all this with the Bourbon and Oak cologne. The shaving cream last a long time and should be used sparingly. The value is in the amount you use. It’s far less than a cheaper shaving cream but offers superior protection and excellent moisturizing elements. The cologne lasts all day and does not require but a single spray under both arms and a single spray on a wrist rubbed against the other. If you need an anti perspirant use one without a scent since this will conflict with the cologne. The value is definitely there as this cologne albeit simple in appearance has very delicate notes reminiscent of my more expensive cologne. I use Creed Vetiver for going out. This cologne has a very similar quality but is, of course, a different bouquet. Overall the whole line of Creamo products seems to be well thought out and outshines many higher end products such as Clinique or Brickell which I have also used. It comes down to value and quality. That’s where it really wins. It’s made in California where I live!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
B
Verified Purchase
BRANDON MCCOLLOUGH
Lexington, US
★★★★★ 5
Smooth Lather and a Balanced, Refreshing Scent
Scent: Sage & Citrus, Size: 32 Fl Oz (Pack of 1)
This body wash delivers a rich, consistent lather and a scent that’s both clean and uplifting. The sage adds a subtle herbal note while the citrus keeps it bright. It rinses off without residue and doesn’t dry out the skin. A well‑crafted formula that feels premium without the premium price tag.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2026
B
Verified Purchase
BarabbaOr
Bozeman, US
★★★★★ 4
Does this beat Anthony Invigorating wash in the long last smell
Scent: Seagrass & Driftwood, Size: 32 Fl Oz (Pack of 1)
Anthony Invigorating wash (check out my review of that) has a very strong pine scent to it and is a very long lasting smell. How does Cremo's products stand up to it! I put deodorants, shampoos, and body washes through the same rigorous tests. I run 14+ miles 4-5 times a week, swim 20+ lengths (or laps) in a junior Olympic pool 3 days a week, use a Sauna 2-3 times in fifteen minute intervals 4 times a week, and use weights 4 days a week. All of these body washes and shampoos that I try out not only go up against Anthony's but also getting rid of that chlorine smell. I always will finish a product before reviewing it I'll be honest here as always, the Blue Cedar and Cypress at first whiff smelled weird. I can't explain the 1st whiff smell though you have my warning. I thought this was going to be my least favorite of the 3 different Cremo products (bourbon and oak, seagrass and driftwood, and this one) that I received. I have the policy to use all the products up in their entirety, so you don't have to. After using it up, I actually like the smell of it. The cedar smell comes out once applied. I actually use this with Anthony Blue Sea Kelp Body (check out my review of that). This goes great with it. So on my buy, borrow, or bury review rating system, this is a buy. The issue I have with it, is that Cremo products don't seem to be that moisturizing their smells are good and lasting. This beats the off the chlorine smell of the pool and works great in combination with Anthony's. Try it out, just get past that initial smell, you won't be disappointed. Now for Cremo's seagrass and driftwood. The First smell test of it is very pleasant. It's once you've put it on does that wood smell really come out. The smell is good and does last long though the issue I have that it is not moisturizing. This goes great with Anthony's other 2 products that I have viewed (please check those out). So on my buy, borrow, or bury rating scale, this is a buy. If they could make their products more moisturizing it would be fantastic. I'll be back here to review the Bourbon and Oak, I have not finished it yet though it's probably going to be my favorite of all the 3 Cremo products I've tried out. Please check out all of my other reviews!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2020

recommand products

Regal Revolution Shank Head and Bronze Pocket Base Tying Vise
205.50
Sight Line Provisions Grayling Horween Brown Bracelet
70.00
Sealey Contact Tip 0.8mm MB25/36 Pack of 5 MIG917
12.99
Rose Eau de Pafrum
199.00
Sealey 500mm Air Blow Gun with Safety Nozzle 1/4" BSP Dust Blower Compressor
18.99