SKU: 29972204639

SKB Cases 3SKB-R912U24, 12U 24-inch Deep rSeries Shock Rack Case

Sale price$938.24 Regular price$1042.49
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

SKB Cases 3SKB-R912U24, 12U 24-inch Deep rSeries Shock Rack CaseThe SKB Cases 3SKB R912U24, 12U 24 inch Deep rSeries Shock Rack Case feature a standard depth of 24" from front to rear rail, with lid depths of 4. 5" per lid. All 3SKB Series Roto Shock Racks feature a compound hinge system that allows the lid to swing out and completely around to lie flat against the main body of the case. This also enables effortless removal reinstallation of the lid with a simple lift motion. Both front and rear lids are designed

The SKB Cases 3SKB-R912U24, 12U 24-inch Deep rSeries Shock Rack Case feature a standard depth of 24" from front to rear rail, with lid depths of 4.5" per lid. All 3SKB Series Roto Shock Racks feature a compound hinge system that allows the lid to swing out and completely around to lie flat against the main body of the case. This also enables effortless removal/reinstallation of the lid with a simple lift motion.

Both front and rear lids are designed to protrude into the base of the case approximately 1" with a unique double wall structure that makes them incredibly rigid where this intersection occurs, providing MIL-SPEC sealing characteristics with significantly fewer latches than most competitive cases. This revolutionary design allows for rapid deployment in an up-right configuration, even when stacked -- 3SKB Roto Shock Racks are the only shock racks in the marketplace today that will open front and back while stacked.

The inner rack chassis is built of high strength / lightweight aluminum alloy and 11 gauge hot rolled carbon steel rack rails to DIA-310 standards, creating an H-shaped frame that provides maximum strength. Shock and vibration mitigation is accomplished with eight (8) elastomeric isolators rated for a payload range of 40 - 150 pounds in a standard configuration, and up to 300 pounds in a special order extended payload configuration allowing adequate sway space for ambient air circulation and heat dissipation. The rack rails come pre threaded for standard 10-32 hardware and mounting screws are included. Other standard features include an automatic ambient pressure relief valve and removable 4" casters.

Product Specification:

Exterior: Hard

Built in Shocks: Yes

Rack Units: 12

Front Rail to Back Lid: 28.25 in

Rail to Rail: 23.75 in

Rear Rail to Front Lid: 28.5 in

Product Weight: 94.77 lb

Exterior Length: 36 in

Exterior Width: 26.75 in

Exterior Height: 30 in

Package Weight: 104.55 lb

Box Dimensions (LxWxH): 37 x 30.5 x 27"

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29972204639

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1021 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
G
Verified Purchase
Goleta
Carnegie, US
★★★★★ 5
Quality product
Seeing as it passed the smog test without any issues, it seems this product worked exactly as intended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
M
Verified Purchase
Melodie G Cross
Lexington, US
★★★★★ 5
So far so good
It seems to be working well, so far. The check engine light turned off and the my vehicle seems to be running well. Be sure to follow the instructions. A while back, I wasted some money on a different catalytic converter cleaner because I put the cleaner in on a full tank of gas. It's best to wait until you're at a half tank or less of gasoline before you put in your catalytic converter cleaner. Also, I drove around right after I put in the catalytic converter cleaner and before I filled up my tank again. A couple of days later, I went to the gas station and topped off my tank. Again, it seems to be running well for now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
C
Verified Purchase
ckanchola
Bozeman, US
★★★★★ 4
Works ok for some stuff.
I tried this mainly to clean my cats. It sadly didn't work for that at all. It did however work great as a basic fuel system cleaner. It smoothed out my idle and cleaned my O2 sensors they were a bit lazy before using this product now they switch fast like they are supposed too. In terms of my recommendation I say use as a fuel system cleaner. Or if your cats aren't too clogged in my case I bought an old neglected used car that likely had that problem for years. So I don't think any pour in tank cleaner would work in my case. However if your car just started having cat issues. This might work?? I think it's worth a try at least and isn't much more expensive than a basic fuel system cleaner so why not?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
M
Verified Purchase
Mary C. Lucking
Lake Worth, US
★★★★★ 5
PASSED MY INSPECTION! THIS PRODUCT WORKS LIKE A MIRACLE DONT HESITATE TO BUY IT!
Inspection on my car due the end of January! My check engine light was coming on so I checked with a code reader & found it was a P0420. Read about the Catalytic Converter System possibly being in need of replacement or perhaps clogged. I am a woman, and know next to ZERO about cars, but I can read. Did investigate and found that the replacement of a Catalytic Converter system is mad expensive- also found this Moly Cleaner to add to gas tank. I'm not going to lie; I was nervous as I have a Kia Rio 2014 that has a very small gas tank and gets great gas mileage. In reading the consensus seemed to be to add to 1/4 tank of gas and drive fast for good periods of time to blow out the clog (if it was a clog). Did I mention I live in NYC and driving for long periods of time at high speeds can be a problem because of terrible traffic. Anyhow, this Saturday I poured the can into my 1/2 filled tank and hit a parkway near my home early morning. I did drive for 45 miles sometimes at 80mph then 60mph but tried to do it for a good few minutes at a time without getting pulled over. Checked my reader again, and it was not quite ready but the engine light did stay off. Next day, drove to work, stuck in traffic somewhat & never made it over 20mph & checked my reader again- all good to go for inspection. Went last night- my car PASSED and got that sticker in my window- so I am good for another year. The BEST money I have spent all year. Thank you for carrying this product! Saved me thousands! DONT HESITATE TO USE THIS. The hardest part for me was removing the cap on the can!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 13, 2026
C
Verified Purchase
CLEVEinCR
Pawtucket, US
★★★★★ 5
Great stuff
Seemed to work as well as or better than some more expensive catalytic converter cleaners. I put it in while at 1/3 tank and my Check Engine light went out almost immediately once I started driving. My Tundra has almost 230,000 miles and still runs great but was getting a little harder to start after I switched from full synthetic oil to conventional. I’ll never do that again and immediately switched back but the damage was done. Check engine light came on and I had to crank longer to get it started. Adding this Liquid Moly fixed both issues temporarily. I have to wonder if this was used regularly, say every 3 months, if it would clean the catalytic converter more permanently?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025

recommand products