Works Bell U Turn Harness Airbag SRS Light Fix Resistor Fuse - Male & Female

Works Bell U Turn Harness Airbag SRS Light Fix Resistor Fuse - Male & FemaleWorks Bell U Turn Harness is a component used to turn off the airbag warning light when the original steering wheel or seat with an airbag is replaced with an aftermarket one without an airbag. For vehicles with a female terminal in the airbag coupler, use the male type U Turn Harness, and for those with a male terminal, use the female type U Turn Harness; please refer to the images for assistance in selecting the correct part. Installation notes:

Works Bell U Turn Harness is a component used to turn off the airbag warning light when the original steering wheel or seat with an airbag is replaced with an aftermarket one without an airbag.

For vehicles with a female terminal in the airbag coupler, use the male-type U Turn Harness, and for those with a male terminal, use the female-type U Turn Harness; please refer to the images for assistance in selecting the correct part.

Installation notes:

• Please do not bend the terminals more than once. Repeated bending may cause them to break. Ensure that all types are securely fixed to avoid poor contact. If necessary, use vinyl tape or similar materials. Poor contact may cause the SRS warning light to illuminate or blink.
• After handling the SRS airbag connector and U Turn Harness, you do not need to pull them into the steering wheel boss. Instead, store them by wrapping them inside the boss cover and securing them with tape to prevent any abnormal noise.
• Due to the electrical characteristics of your vehicle, the warning light may illuminate or blink even if the wiring is correct. In this case, the light may not turn off without using a diagnostic tool at a dealership or similar facility.

Made in Japan.