ICON K67115 7" Stage 5 Suspension System

The Icon K67115 7" Stage 5 Suspension System from GAP gives your 2017-2022 Ford F-250/350 6.7L Powerstroke 4WD the ground clearance needed for bigger wheel and tire combinations. This Icon Vehicle Dynamics 7" suspension system is a great way to lift your 4WD 2017-2022 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance. This suspension system is perfect for on-road and off-road use including towing, job site duty, and provides ultimate performance for extreme off-road adventure. Icon's 7" Stage 5 System is comprised of dual rate coil springs, progressive leaf springs, 4-Link kit, adjustable track bar, dual opposing steering stabilizer kit, Icon CDC Valve equipped 2.5 Aluminum Series piggyback reservoir front and rear shocks, plus all of the necessary hardware for installation.

Features:

• FK Rod End Bearings Provide Extended Longevity And Minimal Deflection
• Lifetime Guarantee Against Coil Spring Breakage Or Sag
• Lifetime Guarantee Against Icon Fabricated Component Breakage Or Manufacturer Defect
• Approximately 50% Increased Front Wheel Travel Over Stock
• Icon-Engineered Dual Rate Coil Springs Deliver Exceptional Vehicle Control Over Varying Terrain
• Progressive Leaf Springs Improve Ride Quality Without Reducing Towing Capacity
• Icon 4-Link System Eliminates Binding During Articulation And Maintains Positive Caster Through The Entire Range Of Travel
• Icon Shocks Feature Vehicle Specific Tune For Superior Performance And Ride Quality
• Icon CDC Valve Allows For 10 Clicks Of Quick And Easy Compression Adjustability
• Shocks Are Fully Rebuildable And Re-Valvable
• One-Piece Impact Extruded Aluminum Cylinders Offer Excellent Corrosion Resistance And Consistent Finish (2.5 Aluminum Series Shocks)

Notes:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" w/ 5.00" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 20x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Application Note #6: Springs Are Rated For Diesel Engines Only
Application Note #8: This System May Require A Carrier Bearing Drop Bracket Kit (33700)
Application Note #29: 7" Systems Using A 4-Link In Place Of The Factory Radius Arms Do Not Require The Use Of Alignment Cams. Caster Can Be Adjusted By The Lower Link Arms.
Application Note #31: '08 - Current Super Duty Models With Gas Engines May Need Exhaust Modified To Clear Front Driveshaft
Application Note #55: Shocks Are Fully Serviceable. Coil Over Heights Indicated Are For A Stock Equipped Vehicle
Application Note #57: Factory Block Must Be Used In Conjunction With Icon Leaf Springs For Truck To Sit Level.
Application Note #118: OEM Stabilizer DOEs Not Work With Required Drag Link Flip On This Kit

Tech Notes:
2017-2019 Super Duty models will have front lift height of 7" over stock.
2020-2022 Super Duty models without Tremor package will have front lift height of 7.75" over stock. May require taller rear blocks with springs to sit level.
2020-2022 Super Duty models equipped with Tremor package will have front lift height of 6.75" over stock. May require taller rear blocks with springs to sit level.
Brake line kit (Part # 61110) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)

Note:

Installation Manuals:
I164504 Installation Manual
I37701CP Installation Manual
I64038 Installation Manual
I67015 Installation Manual
I67035 Installation Manual