
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
For Your Every Summer RSVP, with Code: SUMMER15
Description
Pine Cushion Corner Angle 40mm x 40mm x 2400mmPine cushion corner angle 40mm x 40mm x 2400mm offers a softened, rounded profile ideal for finishing internal corners, shelf edges and board joints. Cut from straight grained softwood, this 2. 4 metre length conceals fixings and tidies minor surface gaps with a neat, consistent appearance. Specifications Property Detail Material Pine (softwood) Profile Cushion corner angle Nominal Size 40mm x 40mm Length 2400mm Finish Unfinished, ready to paint or
Pine cushion corner angle 40mm x 40mm x 2400mm offers a softened, rounded profile ideal for finishing internal corners, shelf edges and board joints. Cut from straight-grained softwood, this 2.4 metre length conceals fixings and tidies minor surface gaps with a neat, consistent appearance.
Specifications
| Property | Detail |
|---|---|
| Material | Pine (softwood) |
| Profile | Cushion corner angle |
| Nominal Size | 40mm x 40mm |
| Length | 2400mm |
| Finish | Unfinished, ready to paint or stain |
| Use Class | Internal use |
What it's used for
- Finishing internal wall corners where two surfaces meet, giving a clean transition without a sharp edge
- Edging shelves and worktops to soften exposed board ends and conceal fixings
- Covering board joints on stud partitions or panelled walls for a tidy, finished look
- Decorative trim in furniture, fitted wardrobes and alcove builds where a subtle rounded profile is preferred over a hard angle
Fitting and handling
Before fixing, allow the moulding to acclimatise in the room where it will be installed for at least 24 to 48 hours, particularly in heated or humid spaces such as kitchens. It can be fixed using panel pins, wood adhesive or fine screws countersunk below the surface; for painted finishes, fill pin holes with a suitable wood filler before priming. Store the lengths flat and supported along their full run to prevent bowing prior to installation.
FAQ
What is a cushion corner angle used for?
A cushion corner angle is a right-angle moulding with a slightly rounded outer face. It is fitted to internal corners, shelf edges and board joints to soften sharp edges, neaten the junction between two surfaces and hide minor gaps or screw fixings.
Can I paint or stain this pine corner angle?
Yes. The moulding is supplied unfinished and will accept most interior wood primers, paints and stains. Lightly sand with 120-grit paper before applying a primer coat for the best paint adhesion, or apply a wood conditioner first if you are using a water-based stain on pine.
Is 40mm x 40mm the right size for standard internal corners?
The 40mm x 40mm section suits most standard internal corners and shelf edges in domestic builds and fitted furniture. For finer trim work or narrower shelving, a smaller section may be more appropriate; for heavier structural panelling, a larger angle profile is available.
Browse the full range of internal mouldings and finishing trims at Nottage Timber Merchants in our pine mouldings collection. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy