SKU: 94532586302

KWIK-E-VAC Line Set Flushing Kit Installation Simplifier for Mini Split Air Conditioning Systems

Sale price$31.28 Regular price$34.75
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

KWIK-E-VAC Line Set Flushing Kit Installation Simplifier for Mini Split Air Conditioning SystemsOverview Summary Flush the air and other non condensable gases out of the copper line set and indoor unit Alternative for the inefficient and expensive quick connect line sets Cost effective, simple, and quick evacuation Perfect for most people and installations Description Pioneer KWIK E VAC is an all new, revolutionary, patented kit designed to simplify the installation process. This product is intended to provide an alternative to a vacuum pump, a

Overview

Summary

  • Flush the air and other non-condensable gases out of the copper line set and indoor unit
  • Alternative for the inefficient and expensive quick-connect line sets
  • Cost-effective, simple, and quick evacuation
  • Perfect for most people and installations

Description

Pioneer KWIK-E-VAC is an all-new, revolutionary, patented kit designed to simplify the installation process. This product is intended to provide an alternative to a vacuum pump, a tool that was previously required to install mini splits.

KWIK-E-VAC works by flushing the air and other non-condensable gases out of the copper line set and indoor unit combination, in order to ensure that the refrigerant in the system remains contaminant-free. In order to bleed the lines of any air and check for leaks, a vacuum pump and pressure gauges were previously needed. This kit allows the user to bypass that step, making any mini-split system truly DIY.

Use this as an alternative for the inefficient and expensive quick-connect line sets, which reduce system efficiency and capacity, and cost 10 times more than the cost of this kit. A cost-effective, simple, and quick evacuation, perfect for most people and installations.

Tapless bottle weights 4 oz when empty.

Directions of use:

This kit provides an alternative way to install a split air conditioner, if a proper vacuum pump is not available for the evacuation of the line sets. See below instructions, only to replace the specific section in the installation manual covering the use of a vacuum pump for evacuation. Follow all remaining instructions in the manual as originally written.

  1. Read all safety instructions above and wear protective gear as suggested.
  2. Keep the metal can upright at all times while using. Do not tilt or tip.
  3. Ensure the electrical power to entire equipment is switched off at the main breaker.
  4. Indoor section of the air conditioner: Connect both copper pipes of the line set to the indoor unit properly and as instructed in the equipment installation manual, using proper torque, methods, and materials approved by the equipment manufacturer.
  5. Outdoor section of the air conditioner: Connect ONLY THE GAS SIDE copper pipe (one with larger diameter) to the GAS side service valve of the outdoor unit properly and as instructed in the equipment installation manual, using proper torque, methods and materials approved by the equipment manufacturer. Do not connect the LIQUID SIDE copper pipe (one with smaller diameter) at this time, until instructed further below.
  6. Connect the end connector of hose of the purging kit to the SERVICE PORT on the GAS SIDE SERVICE VALVE of the outdoor unit tightly. Pay attention to prevent valve damage.
  7. Turn the valve on the flushing kit can tap valve clockwise, reaching all the way down.
  8. You should hear the flow of flushing material flowing into the GAS side of the copper line set and then flowing out freely at unconnected pipe end of the LIQUID side of the copper line set near the outdoor unit. Once flow is confirmed, close the tap valve, then open again for 5 seconds at a time, repeating until about 2/3 of contents in the can are used up. Close the tap valve of the can. (Valve turns CW to open and CCW to close).
  9. If no flow of the material is noticed when first opened, close the flushing kit tap valve, disengage the hose connector from the service port, and adjust the depressor inside the hose connector outward by 1 or 2 turns, and repeat the steps 5 through 7 above.
  10. Now it is time to quickly connect LIQUID SIDE copper pipe (one with smaller diameter) to the LIQUID side service valve of the outdoor unit properly and as instructed in the equipment installation manual, using proper torque, methods and materials approved by the equipment manufacturer. At this stage all 4 pipe connectors are tightly connected.
  11. Open the tap valve again and release the remaining material in the can into the system until contents are entirely used up. Disconnect the hose from the service port of the unit.
  12. Using soapy bubbles spray, carefully check all 4 pipe connections for leaks. If the leaks are present, tighten, adjust, or repair the connection to stop any leaks, and repeat evacuation.
  13. While the purging hose remains attached to the service port, unscrew the tap valve from the top of the canister to release all remaining gas pressure, and wait until all purging material pressure is entirely released. Disconnect the hose from the service port.
  14. Follow the installation instructions provided by the equipment manufacturer for the next steps, such as opening the service valves to release the refrigerant, other verifications, and further startup procedures. For multi-zone systems, use one kit for each zone.

WARNING for California residents only: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Warning: Use only as directed. Read label instructions carefully.

  1. Keep out of reach of children. Intentional misuse by deliberately concentrating and/or inhaling contents may be fatal. Vapors are heavier than air and may spread along floors. Avoid breathing vapors or mist. Avoid contact with skin, eyes, and clothing. Provide sufficient air exchange and /or exhaust in work areas. Handle in accordance with good industrial hygiene and safety practice. THIS PRODUCT IS FOR OUTDOOR USE ONLY.
  2. Contains gas under pressure, may explode if heated. Flammable gas. Do not spray on an open flames or other ignition sources. Keep away from heat. Vapors may form flammable mixture with air. The products should only be used in areas from which all sources of ignition have been excluded. Electrical equipment should be protected to the appropriate standard. No sparking tools should be used. Take measures to prevent the build-up of electrostatic charge. Keep away from open flames, hot surfaces, and sources of ignition. When using DO NOT SMOKE. Disconnect the electrical power to the equipment.
  3. Pressurized container: Do not pierce or burn, even after use. Do not store in enclosed vehicles. Protect from sunlight. Store in a well-ventilated place. Store at temperatures not exceeding 120 degrees F / 49 degrees C. Keep container tightly closed and in a dry and well-ventilated location. Store in original container. The product has and indefinite shelf life when stored properly.
  4. Ensure adequate ventilation, especially in confined areas. Use respiratory protection if needed. Wear safety glasses with side shields. Direct contact with liquid may cause frostbite. Wear proper protective gloves when using.

Contains: 1,1-Difluoroethane which has zero ozone depletion potential and a very low global warming potential. See MSDS for additional safety information at https://www.pdhvac.com

⚠️ Please Note: Internal components and consumables are final sale and non-returnable under any circumstances, whether purchased under warranty or not. Be absolutely certain of compatibility before ordering—when in doubt, contact our support team for assistance. Refer to the Return Policy for more details.

Instructional Video

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 94532586302

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1150 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
beasterson
Draper, US
★★★★★ 5
Absolutely top-knotch
Format: Kindle
9.5/10 This is the pinnacle of Star Wars comic books. A great way to tie in their Indiana Jones character in Aphra and the mainline series to tell an amazing story. Only complaint is a couple of the issues artwork I was not a fan of. I like the more realistic look. Just make sure you read Aphra book 1 and the previous SW books to understand it better. Aphra book 1 being more important
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 6, 2018
F
Verified Purchase
Frank Gino
San Leandro, US
★★★★★ 5
Star Wars embraces fantasy
Format: Paperback
This is Star Wars at its' strangest, and that's a very good thing. Luke and co. fighting through what could easily be Dracula's castle is a truly unique experience. I don't wish to say more for fear of spoilers. As a note though you will get more out of this if you've been following the Star Wars and Dr. Aphra comics. However you can get by without that knowledge as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 26, 2017
D
Verified Purchase
Doc Watson
Pawtucket, US
★★★★★ 3
Gothic Star Wars
Format: Paperback
This trade paperback collects all the issues for the Screaming Citadel story spread over several titles, including the main stay Star Wars series and the Dr Aphra book. As one might expect from a story spread over different titles with different artists and writers, the presentation varies. The art is all over the place. In the Marco Checchetto-drawn initial issue, everyone’s favorite amoral artifact hunter, Dr Aphra, is a striking space vixen. But in the following issues she’s hardly recognizable as the same character--mousier, if still menacing, in her trademark Russian tanker’s hat. To a lesser degree, the same is true for the other characters, including the main SW group. It’s understandable, but a bit disconcerting. The story centers on Dr Aphra, who, in need of a Jedi for one of her typically nefarious purposes, recruits Luke into her scheme. Unfortunately for Aphra, she’s up against a more ruthless foe in the harlequin-looking vampire-like Queen of the Screaming Citadel. Before long, the rest of the group has to show up to rescue them. It’s a gothic story, set in scary castle—not the usual Star Wars fare. There are some good points. Dr Aphra’s almost sociopathic outlook is always good for a few choice lines, the “murderous machines” Bee Tee and Triple Zero are on hand for their own gruesome commentary and some of the Queens hench-people, while not given much to do, are interestingly designed. But overall, the horror movies plotline didn’t seem much like Star Wars to me. Recommended for those who enjoy that type of story, or completists.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 27, 2018
P
Verified Purchase
PWDecker
Pawtucket, US
★★★★★ 4
Luke and Doctor Aphra team up!
Format: Paperback
This is the second crossover event in the Marvel Star Wars comics. It brings the ongoing Doctor Aphra and Star Wars series together. I liked the pairing of Luke with Aphra. They play well off of each other with Luke's naive goodness and Aphra's experienced gray morality. I liked when she called him a wannabe padawan. There are some well designed characters in this comic. The residents of the Screaming Citadel have a goth bdsm vibe. Luke even gets to dress up. I liked seeing him in something different. I want to know more about Sana and Aphra's past!!! Please, Marvel, make a queer love story prequel!!! The murder droids are wonderful. Having them on the same side as the "good guys" for at least the time being led to some funny situations. The last panel intrigued me. I give this graphic novel a 4/5. I am always here for more Doctor Aphra!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2017
K
Verified Purchase
Kindle Customer
Whiting, US
★★★★★ 5
Excellent mini series.
Format: Kindle
This is an excellent follow up to Vader Down. Luke Skywalker and friends take on a bigger threat than The Empire and Darth Vader that is connected to the Jedi. Luke and Dr. Aphra join forces to find the answers Like is seeking. Truly worth reading and entertaining.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2019

recommand products