Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
PYRODRONE F4 RACE with VTX PIT mode - 30x30mmIt's finally here! The pyrodrone F4 board has been one of the very few boards with perfectly flat one side which lot of guys been utilizing as a "shelf" for their VTX and RX. It was time to reroute the pads and offer a direct clean solder option for the TBS UNIFY V3 VTX and the TBS Nano RX similar to the Whitenoise Synergy FC. The Pyro F4 RACE also has a built in socket which makes it plug & play with the Pyro32 F3 45A 4in1 ESC (The correct harness is
It's finally here!
The pyrodrone F4 board has been one of the very few boards with perfectly flat one side which lot of guys been utilizing as a "shelf" for their VTX and RX.
It was time to reroute the pads and offer a direct clean solder option for the TBS UNIFY V3 VTX and the TBS Nano RX similar to the Whitenoise Synergy FC.
The Pyro F4 RACE also has a built in socket which makes it plug & play with the Pyro32 F3 45A 4in1 ESC (The correct harness is ONLY included in the ESC package)
Please check below for tips and Betaflight Settings.
- MPU6000 Gyro STM32F405 CPU @ 168mhz, can be overclocked
- 2-6S direct battery input
- 3.3V 100ma, 5V 2A BEC
- 5V and Vbat Camera Power
- Built in configurable Betaflight OSD
- Flat bottom PCB for SUPER CLEAN builds
- 36x36 PCB with 30.5x30.5 mounting holes
- 6 UARTS.
- UART1 (INVERTER FOR SBUS),
- UART2 (FREE),
- UART3 (INVERTED TELEMETRY), use CLI command : Set tlm_halfduplex=off UART4 (Free),
- UART5 (Smart Audio)
- UART6 (Free)
- The Pyrodrone F4 RACE flight controller can power HV VBAT or 5V Video transmitters.
- BF Target: PYRODRONEF4
Please make sure to jump the correct selection for your VTX.
If you want to use the VTX PIT mode function please type the following in the CLI command line:
resource pinio 1 A15 (Hit Enter)
Set pinio_box = 39 (Hit Enter)
resource pinio 1 A15 (Hit Enter)
Set pinio_box = 39 (Hit Enter)
Save (Hit Enter)
Assign a switch to the VTX PIT option in Betaflight MODES tab.
If VTX PIT mode is NOT needed then just solder your VTX and fly! (no additional settings needed)
If you want to solder the TBS UNIFY 5V direct to the board which is where this FC REALLY shines then here are couple tips for you.
Using the TBS Direct mount feature means you have to flip the board upside down with the USB to the left side of the drone.
SO REMEMBER to change the board orientation in Betaflight configuration tab.
Assign a switch to the VTX PIT option in Betaflight MODES tab.
If VTX PIT mode is NOT needed then just solder your VTX and fly! (no additional settings needed)
If you want to solder the TBS UNIFY 5V direct to the board which is where this FC REALLY shines then here are couple tips for you.
Using the TBS Direct mount feature means you have to flip the board upside down with the USB to the left side of the drone.
SO REMEMBER to change the board orientation in Betaflight configuration tab.
Both the VTX and the board have "anchor" Pads on both sides of the VTX, but we do not recommend using all these anchor points for easier future maintanence in case you ever have to remove the VTX.
Here is what we recommend.
Use a very thin piece of the double sided tape that is provided in your TBS UNIFY V3 package and apply it on the VTX as shown in the below picture.
This will work as a place holder for you to line up and solder the 4 points.
When sticking the VTX to the board make sure the 4 points on the VTX (VID-AUD-GND-5V) line up with the 4 pads on the flight controller.
Once lined up solder the 4 points.
Once lined up solder the 4 points.
Now it's time to solder your receiver.
The board is labled for TBS NANO RX as the holes perfectly line up with the Nano RX, but you can really use any RX and just choose the correct type of receiver in the Betaflight configuration page.
Our preferred way of mounting the RX is with silicone wires rather than direct solder, Again for easier future maintenence purposes.
Please check the below picture:
For correct voltage reading change the Voltage scale value to 160
If you charge your batteries over 4.20 per cell AKA HV then remember to adjust the Maximum Cell Voltage to 4.4 otherwise the average cell voltage will read wrong on your OSD.
The board is labled for TBS NANO RX as the holes perfectly line up with the Nano RX, but you can really use any RX and just choose the correct type of receiver in the Betaflight configuration page.
Our preferred way of mounting the RX is with silicone wires rather than direct solder, Again for easier future maintenence purposes.
Please check the below picture:
For correct voltage reading change the Voltage scale value to 160
If you charge your batteries over 4.20 per cell AKA HV then remember to adjust the Maximum Cell Voltage to 4.4 otherwise the average cell voltage will read wrong on your OSD.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 931 reviews
Sort
Product Reviews
★★★★★ 5
My favorite sunscreen
Size: 5 Fl Oz (Pack of 1)
The BEST sunscreen I have tried. I LOVE this unscented Coola. It goes on smooth and doesn’t feel sticky at all, you will forget you have it on. It truly is unscented and so light. It’s also effective protection from the sun.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 31, 2025
★★★★★ 5
Great sunscreen
Size: 5 Fl Oz (Pack of 1)
I love this sunscreen and I even use it on my face. Good value in a large size container.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
★★★★★ 5
One of the few body sunscreens that doesn't trigger my sensory issues
Size: 5 Fl Oz (Pack of 1)
I have sensory sensitivities, so wearing sunscreen is usually a pretty unpleasant experience for me. I can't stand heavy textures, greasy finishes, or that sticky sunscreen feeling that seems to sit on top of the skin all day. I'm also bothered by mineral and matte sunscreens that dry my skin out. It's very hard to find a sunscreen as genuinely comfortable as this one is.
I bought the Coola Sunblock Body Lotion because several reviews mentioned that it actually feels like a regular lotion once applied, but I honestly assumed it still wouldn't work for me.
I was genuinely shocked the first time I used this. The texture feels silky and lightweight, absorbs quickly, and leaves my skin feeling soft rather than coated or oily. It really does wear more like a comfortable body lotion than a traditional sunscreen, and I don't notice any residue or oily feel at all, which is amazing.
I also love that it's fragrance-free, which makes it even easier for me to tolerate, especially with sensitive skin and sensory issues.
Coola Sunblock Body Lotion is one of the very few body sunscreens I've tried that I actually enjoy wearing, and it works perfectly. I am very fair and burn easily, but I had no burning or redness on my first outside day of the summer while wearing this.
It's sunscreen that works and that I can actually wear with zero discomfort. Amazing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Love the quality!
Size: 5 Fl Oz (Pack of 1)
Im 63, with fair and sensitive skin. I love this high strength sunscreen that isn't greasy and doesn't have added ingredients and perfumes that bother me and make me break out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 7, 2026
★★★★★ 5
Expensive, but worth it
Size: 5 Fl Oz (Pack of 1)
What's the best sunscreen? The sunscreen you'll use consistently. I like Coola because it feels like moisturizer, not sticky gross sunscreen. It's pricey, but I think you get what you pay for with Coola.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 30, 2025
recommand products
Palm Pilot Portable Keyboard Vintage Folding Keypad with case - P10713U
11.00
Chevy | GMC NBS 1999-2006 Billet Headlight Knob
33.00
Panasonic LUMIX DMC-FP3 14.1MP Digital Camera Black - Untested
20.00
Remington Model LM-8 True To Light 4 Way Lighted Makeup Mirror 2 Sided Magnified
15.00
Chevy | GMC OBS 1995-1999 Billet Glove Box Button
65.00