SKU: 88913589137

Sniper Diecast 340 LPH In-Tank RetroFit Fuel Module w/Return - 19-350

$213.72 $237.47
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Sniper Diecast 340 LPH In-Tank RetroFit Fuel Module w/Return - 19-350Overview: Holley MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast

Overview:

Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Features:

  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • Installs in any fuel tank from 7” to 12” deep to fit a wide variety of applications
  • The low profile design is only 1.275" thick above the tank mounting surface for added clearance when needed
  • The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
  • The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
  • Die cast aluminum construction for corrosion resistance and long lasting good looks
  • ¼” NPT ports for a wide variety of plumbing options
  • Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI or any TBI of EFI conversion
  • 340LPH pump that is E85 compatible for both return and returnless style systems

Application:

Year Make Model Submodel Engine Size
Universal

Specs:

Application Universal
Brand Holley Sniper
Diameter 4.8"
Emission Code 3
Free Flow LPH 340
Fuel System Type Gasoline/E85 Compatible
Fuel Type E85
Fuel Type Gasoline
Material Die Cast Aluminum
NPT Thread 1/4 NPT
Product Type Fuel Pump Module
Warning California Proposition 65
Warranty Limited 90 Day
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 88913589137

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 237 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Crimm
Louisville, US
★★★★★ 3
Decent for the price. Instructions suck but most people should be able to figure it out. More below.
Color: Black, Size: 6 Panel, Color: Black, Size: 6 Panel
SUMMARY: 3 stars from me because it's firmly average. It's fine for the price. Assembly and materials are alright but I can see some caveats depending on your circumstances. Assembly instructions do a subpar job of pointing out some details. ASSEMBLY INSTRUCTIONS: Maybe it's because I'm autistic and/or building model kits and assembling stuff is my jam, but I honestly thought people were exaggerating when they were complaining about the instructions and I'd be able to flex my ~superior assembly skills.~ I was wrong! These instructions genuinely suck, and whoever is responsible for making them should be ashamed. The instructions do a poor job of calling out some details regarding orientation of parts, and some of the images do not actually match the physical parts. For example, it does not really outline the assembly of the end panels clearly, and I can see someone accidentally using the wrong poles. I've drawn over a photo to show what you should do to try and make it clearer. Additionally, the manual shows a flathead screw for bolting the feet into position, but the actual screw is not a flathead. It also does not point out the counterbore, so if you aren't paying attention you may put the foot pads onto the wrong side of the foot. It's also missing the fact that you need to use another one of the plastic pieces when you finish assembling a panel. ACTUAL ASSEMBLY & MATERIALS: To their credit, all of my bags were clearly labeled. The assembly process wasn't difficult. It's mostly just tedious and requires a fair amount of space. I was able to assemble it by myself without any real difficulty. However, the way it's assembled means two things. One, the fabric parts aren't removable without disassembly. So if you want to use this in an environment where they would require cleaning, I would seriously recommend looking for another option. Or, you could buy this just to use the frame pieces and then somehow buy or make your own fabric pieces designed to be removable with velcro or something. Two, because of the materials I really don't have a lot of faith in this thing surviving disassembly and reassembly. Like a lot of sorta-cheap-but-convenient furniture, it uses those spring-button connections and plastic inserts with self-tapping screws. Those things are not really meant to be disassembled and rethreaded. It also relies a lot on the tension of the poles and the fabric to keep everything rigid and squared, which I think puts a lot of pressure on the aforementioned buttons, plastic inserts, and the hollow metal rods. So I feel like that will also cause issues with disassembly and reassembly. Basically once this thing is assembled, it's not really meant to be disassembled. The best you can do is spot-clean the fabric if you need to. Speaking of the fabric, I didn't see any labels on them or anything in the manual that says what they are, but they feel like some kind of polyester. They generate static electricity pretty easily, and pet hair and debris sticks easily. So that's another downside of them not being easily removable. For the most part it does seem pretty stable. The poles seem to be pretty uniform in length so they're all making contact with my floor. Obviously this isn't structural so it shouldn't be supporting anything, but the two main feet seem to be doing fine with keeping this thing upright. CLOSING THOUGHTS: Really, it's fine for what it is, but it could be better in a lot of little ways and the substandard quality of the instructions just seems unprofessional to me, which is why I'm being so harsh with my rating. Depending on your needs and environment you may want to consider a different option. Preferably one that is made to be disassembled with better materials, and/or one with fabric pieces made to be removed easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2023
B
Verified Purchase
Barb
Cuba, US
★★★★★ 1
Not as it seems
Color: Black, Size: 6 Panel
these are awful... Each individual panel is fine, but when you put it together it can barely stand up, and the clips that hold it together keep popping off. Steer clear of this item.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
T
Verified Purchase
Timothy Beckner
Massapequa, US
★★★★★ 5
As described
Color: White, Size: 6 Panel
Works great in my clinic
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
A
Verified Purchase
A.Rahman
Fort Morgan, US
★★★★★ 5
Excellent
Size: 3 Panels, Color: Grey
Very good quality, sturdy, and easy to install. Blocks light very efficiently; non-see-through fabrics. Excellent quality for the price. Highly recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
G
Verified Purchase
Genessis Rondon
Natrona Heights, US
★★★★★ 5
Sturdy and Very Practical
Size: 6 Panels, Color: Grey
This room divider is sturdy, easy to set up, and looks clean and professional. It provides great privacy and is perfect for separating spaces at home or in an office. I love that it’s foldable and easy to move around when needed. Very good quality and worth the purchase!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026

recommand products

G BOOST CAN AM WORLD’S BEST RACE SERIES DRIVE BELT
109.97
POLARIS RZR 170 STEERING WHEEL HUB FOR 6 HOLE STEERING WHEEL
38.95
Cortenstaal Plantenbak Vierkant | Gelast | 100 x 100 x 40 | Zonder bodem
107.58
12x Vinca minor 'Alba' - 10-25 cm - Ø9
35.95
6x Vinca major 'Alba' - 10-25 cm - Ø9
29.95