Textile Factory Boards Raw

Textile Factory Boards RawThis beautiful reclaimed Pine timber has been salvaged from a huge European textile factory. Built in the 1930's these boards formed all the floors and ceilings of the entire buildings. These boards have been sanded back further to remove more of the original surface, then finished in a raw lacquer to give a natural and unfinished look and feel. As all of the other boards in this range, they have been hand sanded and still have some original surface

This beautiful reclaimed Pine timber has been salvaged from a huge European textile factory. Built in the 1930's these boards formed all the floors and ceilings of the entire buildings. These boards have been sanded back further to remove more of the original surface, then finished in a raw lacquer to give a natural and unfinished look and feel. As all of the other boards in this range, they have been hand sanded and still have some original surface fixing marks that are visible.

Trade enquires welcome.

• Product – Engineered Textile Factory Boards Raw.
• Surface – Hand sanded original
• Engineered wear layer - 6mm Reclaimed Pine
• Ply Spec: 15mm FCS BB/BB Birch plywood EN314-2 class 3, EN636-2, EN13986
• Width: Mixed - approx 100mm - 140mm
  
• Thickness - 21mm
• Length: Approximately - 2.4m
• Holes: Yes, larger ones will be filled.
• Cracks: Yes, larger ones will be filled.
• Colour variation: some
• Joint detail: Hand worked tongue and groove.
• Finish – Raw lacquer

Fixing methods: Guidelines Only

• Fully glue down: Yes
• Face nail or secret nail: Yes
• Float: No
• Use over under floor heating: Yes, always check with UFH manufacturer's guidelines