OMP 49" Bighorn Pro ARF with flaps - Red 1,24m
SKU: 64385518479

OMP 49" Bighorn Pro ARF with flaps - Red 1,24m

$126.00 $140.00
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

OMP 49" Bighorn Pro ARF with flaps - Red 1,24mOMP 49" Bighorn Pro ARF with flaps Red 1,24m An ARTF kit of a sporty high wing aeroplane (1,250 mm wingspan) with 3D aerobatic STOL capabilities thanks to large control surfaces and flaps for 500 600W brushless motor with 3S LiPo. Very light iron on film covered balsa plywood airframe. Aileron, flap, elevator and ruder control. The aerobatic high wing Bighorn Pro plane proves a classic balsa airframe sporting large control surfaces, flap and powerful

  • OMP 49" Bighorn Pro ARF with flaps - Red 1,24m
  • An ARTF kit of a sporty high-wing aeroplane (1,250 mm wingspan) with 3D aerobatic/STOL capabilities thanks to large control surfaces and flaps for 500-600W brushless motor with 3S LiPo. Very light iron-on film covered balsa/plywood airframe. Aileron, flap, elevator and ruder control.

    The aerobatic high-wing Bighorn Pro plane proves a classic balsa airframe sporting large control surfaces, flap and powerful motor could bring you as much fun as similar “foamies”. If you like what all those „Joke“ Pipers are doing in the air, but foam models are not your cup of tea, the Bighorn Pro is a good choice for you.

    The fuselage is of light balsa and plywood “box” design covered by the Oracover® iron-on film. It is prepared for installation of 500-600 W brushless motor using a radial mount (e.g. KAVAN C3542-1000, KAVAN PRO 3542-1150, Model Motors AXI 2820/12 etc. with 40-60 A ESC featuring powerful SBEC). A detachable windshield and large hatch on the top of the cockpit are giving perfect access to the entire power system and RC gear. The elevator and rudder micro servos are to be installed into the tail end of the fuselage.

    The two-piece all-balsa wing with a semi symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons and flaps are controlled by a single servo each.

    The empennage is a light all-balsa work.

    The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)

    The main undercarriage features aluminium legs and lightweight large diameter wheels; the tail wheel with a carbon bracket is coupled with the rudder.

    You will need 500-600 W brushless electric motor (e.g. KAVAN PRO 3542-1150 wit 12x6-6.5” prop, 50-60 A ESC and 3S LiPo at least 30C 2,200-3,000 mAh; you should go for 40C pack if you are seeking 3D performance.

    You will need at least 6-channel RC set to control your Bighorn Pro, a good 7-channel (or more) radio is preferred to enjoy the independent set-up and mixing of all the flap and aileron servos. You will need 6 strong 17 g metal gear micro servos.

    The ARTF kit contents: Oracover® covered fuselage, wing and tailplane, aluminium main undercarriage, tail wheel assembly, wheels, set of accessories and instruction manual.

    Wing span [mm] 1250
    Length [mm] 1040
    Weight [g] 1365 - 1410
    Wing surface [dm2] 27.4
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 64385518479

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2080 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Birmingham, US
★★★★★ 3
Excellent Time Keeper // Terrible Wristband !
The watch itself is fantastic. When I first got it, and set it up, I set it to the time on my computer, which is as accurate as you can get. In the beginning I checked the time accuracy daily. After a few weeks my time checks changed to once, or twice a week. I never had to change the watch's time. The seconds would vary a little, in comparison to the computer clock. But, it never got more than 30 seconds either side of the computer clock. However, the watchband is a big time NO-GO! The buckle, where you connect it on your wrist, can be frustrating most of the time when you are trying to put it on. Once you've got it on, the strap that goes beyond the buckle is held down by a sliding keeper, that slides in and out depending on what you're doing. Terrible design! I wanted to buy a "Twist-a-Flex" wristband, but couldn't find one that matched the unusual design where the straps attach to the watch body. I bought the watch 4 months ago. Today, one of the 4 pins, that connect the straps to the watch body, fell out somewhere, making the watch impossible to wear. Excellent price. Excellent timepiece. Worst design for a wristband that I've ever seen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 22, 2020
E
Verified Purchase
EMac
Lexington, US
★★★★★ 5
Excellent for price, you won't be sorry
If you are looking for a watch with a lot of features that doesn't cost a lot, this is your watch. I tear up watches fairly easily in my line of work and after I killed my Seiko I decided I would hunt out a cheap watch. There aren't a lot of watches at this price range that include a stopwatch, date (with day of the week), AND has a light that is bright enough to actually read the time in the dark. This one does. The watch not dainty; it is big and bulky, bigger than I thought it would be, but not unwieldy and not super heavy. Expect it to be big. This also helps with readability (My son can read the time on this watch from the other side of the couch). The band feels rugged, made of a pliable and soft- feeling rubber and has a two- pronged belt- like closure (think 'biker belt') that keeps it secure on the wrist. Additionally, the holes for the band goes the entire length of the band so it is adjustable for really small wrists up to about 9.25" circumference. Others have complained about how easily the face scratches, but I suspect they've failed to remove the protective coating on the lens. It's a protective film that you have to get your fingernail under to pull off. Once that's off, the lens is crystal clear and fairly tough. I've had mine for a week now and used it under some fairly harsh conditions and the lens is still clear and scratch-free. My only complaint seems petty for a watch at this price point, but the strap-end hold down 'belt'--- the loop that holds down the extra length of the strap when it's buckled--- moves easily and so in use it will occasionally come off and you have to retuck the end back into it. But seriously, this is really minor. If you need an inexpensive digital that's easy to read in both daylight and darkness, ya don't mind a large and bulky, rugged- looking watch, and don't want to spend an arm and a leg, get this one. You likely won't be sorry.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 4, 2023
L
Look4Lucy
Dallas, US
★★★★★ 4
Nice heavy leather with a pebbled look - limited storage
Color: Brown (Bifold), Color: Brown (Bifold)
This is a pebbled leather wallet from Carhartt. I got the brown version and it is a sturdy thicker type of leather than my other wallets. It has a real leather smell and I like the stitching on it as well as the branded carhartt logo on the front lower corner. Things to be aware of that I wish were a bit better. The wallet is on the small side of the spectrum, the area where you keep paper money is just the one compartment, there is no divider like many wallets have. Also, the left inside of the wallet has the clear window where you usually put your photo-id . In this window it is actually a brown mesh rather than a clear plastic so if showing an id you will likely have to take it out each time instead of flashing it. Also, there is not an area behind the "pocket" for the license and the right side just has 3 credit card slots. These are not necessarily bad things but if you are used to carrying around a lot of cards this one may be a challenge. The quality and thickness of the leather give it a nice western look. I will use this wallet when I dont have to carry too much. If you carry a lot of cash this isn't the best but most these days just need a couple of credit cards and a license and this works well for that.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2026
L
ladygoodmood
San Leandro, US
★★★★★ 5
Compact and exactly as pictured! Great quality leather.
Color: Black (Bifold), Color: Black (Bifold)
I am very satisfied with this wallet; it is exactly as described in the listing and shown in the photos. Key Features: • ID Compartment: There is a dedicated section for your ID. It features a mesh cover rather than a fully transparent plastic window. Personally, I don't find this to be a problem because I usually take my ID out to show it anyway, rather than handing over my whole wallet. • Spacious for Bills: Even though it’s a compact bifold, there is plenty of room for bills to fit flat without folding them. There is even a bit of extra space left over. • Design & Size: It’s a very compact and neat wallet, perfect for those who prefer front-pocket options or don't want a bulky feel. Final Verdict: The "full grain patina" leather looks and feels great. If you are looking for a reliable, well-made, and compact wallet, this is a perfect choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
J
JR
New York, US
★★★★★ 4
Durable Leather Wallet with a Minimal Design
Color: Black (Bifold)
This is a nice, heavy-duty wallet that feels built to last. The leather quality is good right out of the box, though it’s a bit stiff at first. If you prefer a softer feel, applying some leather conditioner or Neatsfoot oil helps break it in nicely. The layout is simple and practical. Three card slots on one side, an ID holder on the other, and a full-length pocket for cash. It keeps things minimal, which is great if you don’t want a bulky wallet sticking out of your pocket. The only thing I wish it had is RFID protection, but aside from that, it’s a solid everyday wallet that does exactly what it’s supposed to do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026

recommand products

Weathered Oak Wool, Silk, and Linen Sport Coat
447.50
Navy with Pink and Silver Regimental Stripe Silk Tie
125.00
Fine Diamond Print Silk Tie
133.74
Zed Patterned Silk Tie
165.00
Fuchsia with White and Andover Blue Repp Stripe Silk Tie
165.00