LES 6,000kg Machinery Toe Jack

LES 6,000kg Machinery Toe JackLES Machine Toe Jacks are designed to lift heavy machinery and other similar industrial loads from a low height. Complete with two lifting positions and one static load position for multi purpose use. Using the lower toe, our Machine Jack can lift up to 6tonnes (6,000kg) at the lowest entry level which will give a lifting height of 35 195mm, alternatively using the top head with the screw retracted to lift 7. 5t (7,500kg) up to 560mm. In addition to

LES Machine Toe Jacks are designed to lift heavy machinery and other similar industrial loads from a low height. Complete with two lifting positions and one static load position for multi-purpose use. Using the lower toe, our Machine Jack can lift up to 6tonnes (6,000kg) at the lowest entry level which will give a lifting height of 35-195mm, alternatively using the top head with the screw retracted to lift 7.5t (7,500kg) up to 560mm. In addition to this, you can safely position a static load up to 10tonnes on top of the screw.

Each of our LES Machinery Jacks is quality assured, individually serial numbered, CE compliant and complete with a certificate of conformity.

Operation is easy, simply place the jack under the load, slide the included pump handle into the pump housing and begin pumping, the toe/head of the jack will begin to rise and lift the load. In order to retract the jack, remove the handle from the pump housing, the end of the handle features two grooves that fit the pressure relief valve located on the back of the jack below the carrying handle, turning anti-clockwise slowly provides controlled descent of the load. Always be sure to resecure the valve once the pressure has been released and the toe lowered.