Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATV312HD15N4Main Range of product Altivar 312 Product or component type Variable speed drive Product destination Asynchronous motors Product specific application Simple machine Assembly style With heat sink Component name ATV312 Motor power kW 15 kW Motor power hp 20 hp [Us] rated supply voltage 380 500 V 15 10 % Supply frequency 50 60 Hz 5 5 % Network number of phases 3 phases Line current 48. 2 A at 380 V, Isc = 22 kA 36. 8 A at 500 V EMC filter Integrated
Main
| Range of product | Altivar 312 |
| Product or component type | Variable speed drive |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Assembly style | With heat sink |
| Component name | ATV312 |
| Motor power kW | 15 kW |
| Motor power hp | 20 hp |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network number of phases | 3 phases |
| Line current | 48.2 A at 380 V, Isc = 22 kA 36.8 A at 500 V |
| EMC filter | Integrated |
| Apparent power | 32 kVA |
| Maximum transient current | 49.5 A for 60 s |
| Power dissipation in W | 492 W at nominal load |
| Speed range | 1…50 |
| Asynchronous motor control profile | Sensorless flux vector control with PWM type motor control signal Factory set : constant torque |
| Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 25 mm² AWG 3 |
| Supply | Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection |
| Communication port protocol | Modbus CANopen |
| IP degree of protection | IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part |
| Option card | Communication card for CANopen daisy chain Communication card for DeviceNet Communication card for Fipio Communication card for Modbus TCP Communication card for Profibus DP |
Complementary
| Supply voltage limits | 323…550 V |
| Network frequency | 47.5...63 Hz |
| Prospective line Isc | 22 kA |
| Continuous output current | 33 A at 4 kHz |
| Output frequency | 0…500 kHz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...16 kHz adjustable |
| Transient overtorque | 170…200 % of nominal motor torque |
| Braking torque | 150 % during 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
| Regulation loop | Frequency PI regulator |
| Motor slip compensation | Adjustable Automatic whatever the load Suppressable |
| Output voltage | <= power supply voltage |
| Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 4.5 N.m |
| Insulation | Electrical between power and control |
| Analogue input number | 3 |
| Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm AI3 configurable current 0...20 mA, impedance: 250 Ohm |
| Sampling duration | AI1, AI2, AI3: 8 ms analog LI1...LI6: 4 ms discrete |
| Response time | AOV, AOC 8 ms for analog R1A, R1B, R1C, R2A, R2B 8 ms for discrete |
| Linearity error | +/- 0.2 % for output |
| Analogue output number | 1 |
| Analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits |
| Discrete input logic | Logic input not wired (LI1...LI4), < 13 V (state 1) Negative logic (source) (LI1...LI6), > 19 V (state 0) Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic: (R2A, R2B) NC - 100000 cycles |
| Minimum switching current | R1-R2 10 mA at 5 V DC |
| Maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms |
| Discrete input number | 6 |
| Discrete input type | (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm |
| Acceleration and deceleration ramps | S, U or customized Linear adjustable separately from 0.1 to 999.9 s |
| Braking to standstill | By DC injection |
| Protection type | Input phase breaks: drive Line supply overvoltage and undervoltage safety circuits: drive Line supply phase loss safety function, for three phases supply: drive Motor phase breaks: drive Overcurrent between output phases and earth (on power up only): drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: motor |
| Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
| Local signalling | 1 LED (red)drive voltage: Four 7-segment display unitsCANopen bus status: |
| Time constant | 5 ms for reference change |
| Frequency resolution | Analog input: 0.1...100 Hz Display unit: 0.1 Hz |
| Connector type | 1 RJ45 for Modbus/CANopen |
| Physical interface | RS485 multidrop serial link |
| Transmission frame | RTU |
| Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen 4800, 9600 or 19200 bps for Modbus |
| Number of addresses | 1…127 for CANopen 1…247 for Modbus |
| Number of drive | 127 for CANopen 31 for Modbus |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Outer dimension | 390 x 245 x 190 mm 595 x 234 x 268 mm 330 x 245 x 190 mm |
| Height | 329.5 mm |
| Width | 245 mm |
| Depth | 192 mm |
| Net weight | 11 kg |
Environment
| Dielectric strength | 2410 V DC between earth and power terminals 3400 V AC between control and power terminals |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 |
| Standards | IEC 61800-5-1 IEC 61800-3 |
| Product certifications | UL CSA DNV GOST C-Tick NOM |
| Pollution degree | 2 |
| Protective treatment | TC |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3 |
| Ambient air temperature for storage | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without (with protective cover on top of the drive) -10…60 °C with derating factor (without protective cover on top of the drive) |
| Operating altitude | <= 1000 m without 1000...3000 m with current derating 1 % per 100 m |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 964 reviews
Sort
Product Reviews
★★★★★ 5
Surprisingly comfortable and stylish wrist rest!
Color: Walnut Wood, Size: Large
This wrist rest is the perfect compliment to my desk set up. I was hesitant about buying a wood product like this, but I’ve been pleasantly surprised how comfortable and smooth it is during extended use. For the price, it feels like a premium product, and I love that it stays put with the rubber feet. The size is perfect for a full-size keyboard, with just the right thickness to keep your wrist and palms comfortable. If you’re looking for an elevated way to decorate your desk while protecting your wrist, this is a great choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
★★★★★ 5
Great wrist rest with a modern look!
Color: Walnut Wood, Size: Medium, Color: Walnut Wood, Size: Medium
This is a great looking addition to my desk. It’s a just the right length to fit my keyboard and I love the walnut coloring! It’s real wood and has nice rubber feet on the bottom to keep it from moving around. The angle is nice for my wrists and it’s easy to clean with just a damp cloth. If I ever wear this one out (which I doubt) I’d buy another!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 31, 2026
★★★★★ 5
Super comfortable - much better than memory foam wrist rests!
Color: Walnut Wood, Size: Large, Color: Walnut Wood, Size: Large
Get this wrist rest - you won't be disappointed. Had ergonomic keyboards and have tried memory foam rest in the past and this is much better. Smooth wood, perfect height and very supportive to keep wrists in neutral position when typing. Got the 17.3" and like that there's ample room to not feel squashed, but probably could have done with the medium length. Great angle for my mechanical keyboard. Love it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
★★★★★ 4
What an excellent wrist rest! Except for this one thing....
Color: Walnut Wood, Size: Large
This is a solid piece of wood with great quality. Fantastic large rubber grips on the bottom (left and right sides only).
Pro: I use it for editing and gaming. And though I thought the wood might be a bad choice in the long run, it turns out it's pretty nice. Not as comfortable as a gel rest but I knew what I was getting when I ordered it. I buy things for function AND aesthetics. I love how this looks. The uniqueness is really something. I got the natural one instead of the black so that the grains and lines can be easily seen.
Con: Unfortunately, after almost 2 months, the wood has warped some. Not enough to effect my typing but, enough that I notice it. The warp is the kind where the opposite angled corners go up and down. While the other 2 corners are fine. In my case, the top left and bottom right, when pressed independently, rock the wrist rest. The top right and bottom left stay grounded. This is why I took a star off. Because there's no way this should be happening.
So, looks and quality are up there. The rubber grips are solid. Why it's warping is puzzling to me. NO liquid wasted on it. Or, extreme temperature changes have happened. I've made sure the rubber grips. And that the surface the rest sits on (a glass mouse scrolling top by Superglide) is clean. Yet, I get this slight rocking. It bugs me this all happened right after the return window closed. I would've simply exchanged it. I love it too much. I mean, this is, again, a SOLID piece of wood. Maybe this won't happen for everyone. I mean, it's wood. Eh
I would still recommended this regardless.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 24, 2025
★★★★★ 5
Fantastic Product
Color: Walnut Wood, Size: Small
This is very nice! I type all day for my job and this made a big difference. It's very comfortable and supportive.
Im allergic to latex rubber, which is in most gel options. It's really nice to have a safe, effective alternative
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026