Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Action Clutch 90-94 Mitsubishi Eclipse 2.0L (4G63) Non-Turbo 2WD Ironman Sprung (Street) Clutch KitThe Action Clutch Ironman Sprung (Street) kit is engineered specifically for dedicated high powered race vehicles, delivering durability and reliable performance. It features our American Sintered Iron friction material with our Dual clamp load heavy duty pressure plate that ensures maximum torque holding capacity. The clutch engagement is aggressive with an on off feel, without introducing clutch chatter. Some light engagement noise and gear rattle
The Action Clutch Ironman Sprung (Street) kit is engineered specifically for dedicated high powered race vehicles, delivering durability and reliable performance. It features our American Sintered Iron friction material with our Dual clamp load heavy-duty pressure plate that ensures maximum torque holding capacity. The clutch engagement is aggressive with an on/off feel, without introducing clutch chatter. Some light engagement noise and gear rattle may be experienced during operation due to the nature of the product. No compromises are made in this kit, ensuring optimal performance even under extreme conditions. This kit is not intended for daily use and should only be used in race applications. At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time. NOTE: Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you're unsure what kit is right for you, contact Action Clutch direct. 250% INCREASED HOLDING CAPACITY OVER FACTORY KIT SPECIFICALLY ENGINEERED FOR TRACK USE APPLICATIONS ONLYThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1994 | Mitsubishi | Eclipse | GS |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 712 reviews
Sort
Product Reviews
★★★★★ 5
For the money this is amazing!
Style: Corded
I love this rotary tool. Mind you it’s not a 150$+ dremmel but it is a workhorse and very reliable. I see these comments of disappointed people saying it’s not up to there standards and there dremmel is better. I don’t understand that. This is a 20$ rotary tool and the best one for that price you can find. Most of these reviews are comparing to high end expensive dremmels and that doesn’t make sense to me. Anyway I like the rotary tool very much and the first thing I did was buy the keyless Chuck made by wen so I don’t have to deal with collets and have them wear out or keep changing them when I need to use a different size bit. Best investment I made. Makes life so much easier. I ended up buying 2, one for the rotary and one for the flex shaft. Also if you have never used a flex shaft you need to understand that you have to take the collar off and slide the insert out of the flex shaft so you can clamp the rotary tool on it and then screw it on where you removed the collar. I recommend every 20 to 30 hours of use with the flex shaft take the insert out and wipe the grease off and reapply a light amount of grease. That way it doesn’t heat up. I’ve found that with this particular flex shaft graphite does not work so well like other models. It will get hot with graphite. I’ve found that Valvoline red high temp bearing grease works the absolute best. You can buy it in the tube here on Amazon or at you’re local auto parts store. The high temp is what you need and it prevents grease from melting down into the handle of the flex shaft. All in all this is a win win if you understand how to maintain and take care of it. I originally got one of these because my grandfather has one and it’s over 12 years old and it’s still working. Probably has a couple thousand hours of use on his. Take care of you’re stuff it will take care of you…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 24, 2023
★★★★★ 5
74 monte carlo Resto
Model: NewSLS50_52
Great product easy installation with sheets cut to size,using for Classic car Restoration,floor pan and doors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Impressive Sound Deadening Solution with Enhanced Audio Quality
Model: NewSLS50_52
I recently purchased the Siless 50 mil (1.3mm) 52 sqft Car Sound Deadening mat, and I am delighted with the results it has delivered. Right from the start, I was impressed with the packaging, which ensured the product arrived in perfect condition.
One of the standout features of this sound deadening mat is its ease of use. It was a breeze to cut and modify according to my specific needs. Whether I needed to cover specific areas or customize the size, the mat accommodated my requirements effortlessly. This flexibility made the installation process a breeze.
The Siless Sound Deadening mat has proven to be highly effective in reducing outside noise within my vehicle. With just a half cabin install, I noticed a significant reduction of approximately 10 decibels, making my driving experience much quieter and more comfortable. The mat acted as a reliable barrier against external noise, allowing me to enjoy a more peaceful ride.
Furthermore, the sound quality from my vehicle's audio system experienced a noticeable improvement. The Siless mat effectively dampened vibrations and minimized resonance, resulting in cleaner and more refined audio output. The mat's thickness of 50 mil (1.3mm) ensures optimal sound absorption, contributing to its effectiveness in creating a quieter and more enjoyable driving environment. I can now appreciate the full range of tones and enjoy a more immersive music experience during my drives.
Overall, I highly recommend the Siless 50 mil Car Sound Deadening mat for anyone seeking a reliable and effective solution to reduce noise and enhance audio quality in their vehicle. The easy cutting and modifying process, along with the excellent packaging, contribute to a seamless installation experience. With a significant reduction in outside noise and an improvement in sound system performance, this sound deadening mat has exceeded my expectations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2023
★★★★★ 5
Good quality sound deadener at a good price.
Model: NewSLS50_52
Quality sound deadening that adheres to body panels well. You can easily hear the vibration reduction after just the first piece by tapping on the body panel before and after.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 21, 2025
★★★★★ 4
Good stuff at a good price
Model: NewSLS50_52
Works well and sticks well. I used a roller and it has been over a year and everything still sticking as good as day i put it everywhere. I didnt use any adhesive but I did wipe everything down with acetone before I applied. Good stuff at a good price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025