FT INJECTOR 520 LB/H

FT INJECTOR 520 LB/HThe FT Injector is compatible with any ECU available on the market and an 8A 2A Peak and Hold injector driver required. FEATURES REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders. It has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used Reduce the number of injectors, connections and hoses in your project; Compatible

The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.

FEATURES

• REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.
• It has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used
• Reduce the number of injectors, connections and hoses in your project;
• Compatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)
• Tested and approved on +4,000 horsepower engines
• Compatible with any ECU on the market
• Use outputs from your ECU (by reducing the number of injectors)
• FuelTech warranty and support
• Project developed prioritizing the quality and durability of the injector.

TECHNICAL DESCRIPTION

• Low impedance: 1.5 Ohms
• It is necessary to use an 8A/2A Peak and Hold driver
• Voltage limit: up to 24V

DIMENSIONS:

• Injector: 86 x 32 mm
• Packing: 223 x 162 x 60 mm
• Shipping packaging dimensions: 225 x 250 x 65 mm

WEIGHT: 160g

PRODUCT CONTENT:

• 1 FT Injector
• 1 Manual

WARRANTY: 90 days