Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LED UWS Komplettset LumiPlus V1.11 Multicolor 12 V AC inkl. Nische & V4A Blende - B-WareUnterwasserscheinwerfer LumiPlus V1. 11 PAR56 fr Folien und Betonbecken mit Edelstahl V4A Blende Inklusive Nische, Flanschsatz, Dichtungen und Kabelschutzschlauch. Ausgestattet mit einem 2,5 m langen Kabel und 2 x 1,5 mm. Der vorhandene Transformator sowie das Kabel mssen bei Verwendung der 12 V Modell nicht getauscht werden. Hinweis: Dies ist ein Retourenartikel welcher Gebrauchsspuren aufweist (am Artikel und oder der Originalverpackung). Der
Unterwasserscheinwerfer LumiPlus V1.11 PAR56 für Folien- und Betonbecken mit Edelstahl V4A Blende
Inklusive Nische, Flanschsatz, Dichtungen und Kabelschutzschlauch. Ausgestattet mit einem 2,5 m langen Kabel und 2 x 1,5 mm². Der vorhandene Transformator sowie das Kabel müssen bei Verwendung der 12 V Modell nicht getauscht werden.
Hinweis: Dies ist ein Retourenartikel welcher Gebrauchsspuren aufweist (am Artikel und/oder der Originalverpackung). Der Artikel ist technisch geprüft und funktioniert ohne Einschränkungen.LumiPlus V1.11 PAR56 überzeugen durch eine sehr hohe Leuchtstärke, einen geringen Stromverbrauch und eine extrem lange Lebensdauer. Die Version V1.11 bietet ein sehr gutes Preis-Leistungs-Verhältnis im Vergleich zu konventionellen Leuchtmitteln. Die wesentlichen Eigenschaften der LumiPlus V1.11 sind:
Eigenschaften
- Die LumiPlus V1.11 werden auf Basis der PAR56 gefertigt und sind somit für fast alle Scheinwerfer auf dem Markt mit einem konventionellen PAR56 Leuchtmittel verwendbar. Zum Umrüsten wird die 300 W PAR56 einfach durch eine LumiPlus PAR56 ersetzt. Der Transformator und das Kabel müssen nicht gewechselt werden, sofern an der LED 12 V anliegen.
- Bei der Installation von RGB LED wird ein Taster oder ein Empfängermodul für den Farbwechsel benötigt. Eine Fernbedienung kann bei Installation mit Empfängermodul verwendet werden.
- Je 20 m² Wasseroberfläche wird 1 Stück LumiPlus V1.11 empfohlen. Bei dunklen Poolinnenseiten oder Edelstahlpools kann eine höhere Anzahl an Scheinwerfern notwendig werden.
- LumiPlus V1.11 PAR56 Leuchtmittel sind bis 0,4 % salzwasserbeständig.
Technische Daten
- Lumen: 1100
- Watt: 27
- VA: 37
Lieferumfang
- 1x LED-Unterwasserscheinwerfer, Multicolour, Edelstahl V4A Blende, inklusive Nische (17805), Flanschsatz, Dichtungen und Kabelschutzschlauch. Ausgestattet mit einem 2,5 m langen Kabel (2 x 1,5 mm²)
Hinweise zur Installation der Unterwasserscheinwerfer LumiPlus LED V2.0 und V1.11
- An den Leuchtmitteln muss eine Spannung von 12V anliegen (min. 11,5V – max. 12V)
- Der notwendige Kabelquerschnitt und/oder die benötigte Ausgangsspannung am Transformator sind unter Berücksichtigung der tatsächlichen Entfernung von Leuchtmittel zu Transformator und der Leistung der Leuchtmittel durch einen Elektrofachmann auszulegen.
Verwendung von einem Scheinwerfer
- Installation des Trafos in unmittelbarer Nähe des Scheinwerfers
- Bei größeren Distanzen zwischen Trafo und Scheinwerfer, kann der Einsatz eines Trafos mit unterschiedlich anlegbaren Spannungen notwendig werden
Verwendung von mehreren Scheinwerfern
- An jedes Leuchtmittel in unmittelbarer Nähe einen Trafo installieren oder zwischen zwei Leuchtmitteln mittig einen Trafo installieren, sodass die Distanz zwischen Trafo und beiden Leuchtmitteln gleich ist
- Bei Unterbringung des/der Trafo in einem Technikraum/-schacht empfiehlt es sich ggf. für das am nächsten gelegene Leuchtmittel einen Trafo mit 12 V Ausgangsspannung und für die Leuchtmittel mit größerer Distanz einen Trafo mit einer Ausgangsspannung von > 12 V zu verwenden
- Bei Verwendung eines Trafo mit unterschiedlichen Ausgangsspannungen (>12V) muss darauf geachtet werden, dass bei allen angeschlossenen Leuchtmittel lediglich 12 V anliegen. Werden mehrere Leuchtmittel angeschlossen, sollte die Kabellänge gleich sein, damit bei allen Leuchtmitteln die gleiche Spannung, auf jeden Fall aber nicht mehr als 12 V, anliegen
Bei allen elektrischen Anlagen ist unbedingt ein FI-Schutzschalter erforderlich. Diese Arbeiten führt ein konzessionierter Elektromeister durch.
Hinweis: Die abgebildeten Fotos entsprechen dem letzten Produktionsstand. Aufgrund der sich ständig ändernden Marktsituation kann jedoch die tatsächlich gelieferte Ware in Design und Farbe geringfügig davon abweichen. Infolge der technischen Weiterentwicklung sind Änderungen der Form kurzfristig möglich.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 700 reviews
Sort
Product Reviews
★★★★★ 5
Best fix for flats that I've ever used
I have a large zero turn mower that is 10 years old and had a slow leak in the front tire. I tried fix a flat but even a full can would barely get any of the product into the tire and would end up oozing around the valve. After a long search, I found FlatOut. I was reluctant at first because it required removing the valve core, which I had never done. (I'm a 60+ year old female.) But the ratings were so high and the fact it was made with Kevlar, changed my mind. And I am so glad!! The instructions were so simple, core valve came right out (and the tool and new core valve is included), the tube that you pull from the bottle, fit snuggly on the valve stem yet was not difficult to put on. I elevated the bottle, added the amount I thought it needed, removed the tube, pushed it back in the bottle, replaced the cap, and then put the new valve stem back in. It only took a few minutes. And no mess! I had put on rubber gloves, expecting some to spill but it's a thick liquid and does not seep out anywhere it's not supposed to! I filled the tire with air and checked it each day for a week to make sure there was no leak before I used it. I then mowed some rough ground that is hilly and rocky and when I was done, the tire was perfect. I was so pleased I did the same thing to the other tire that never lost any air because I didn't want to wait for a leak.
BUY THIS PRODUCT if you are tired of messing with slow leaks or flat tires! I will never use anything else. I purchased a package of core valves and taped them on the bottle so I'll have them when needed! I would give this product 10 stars if I could. It states on the bottle this product was used in the military, so it really has been tested. Thank you FlatOut for a product that actually does what it says!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 15, 2023
★★★★★ 5
IT JUST WORKS!
Size: 1-Pack (32 oz), Size: 1-Pack (32 oz)
I recently found a piece of wire stuck in the side wall of my Zero Turn mower's rear tire. The tire has less than a full season of use, so I was looking for an alternative to "FIX" my sidewall puncture instead of removing it and patching or replacing. After looking up several different products, I decided to try Multi Seal. After reading the directions, I removed the valve tool that was included with the bottle. It was a little confusing, but the tool is basically a "stopper" for the clear hose that's in the bottle. Once I removed the valve from the stem, I connected the clear hose to the stem and proceeded to squeeze the product into the tire. I was surprised as to how easily it flowed into the tire. It was much easier than other tire sealants I've used. Although, its recommended to use half of the bottle in a rear tire, I used significantly more. I wanted to make sure the sealant would get to the sidewall. When I was finished adding the product, I replaced the valve in the stem and inflated the tire to the recommended pressure. It was at this time I pulled the wire from the tire. I started the mower and drove it for a few minutes. When i stopped, the product had started to escape the tire through the puncture. In fact, I had another unknown puncture that showed signs of the Multi Seal product. After a few minutes, air was still escaping from the punctures so I ended up driving the mower for about 10-15 minutes. This seemed to do the trick. Over a week later and 1.5 hours of operation later, the tire is still holding air pressure. This product is the BEST tire sealant I have ever used. I will be adding it to all my non-highway tires that I own.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2019
★★★★★ 4
Works with effort
Size: 1-Gallon (128 oz)
I was skeptical about buying this. However, after installing the recommended ozs per tire, it seems to have fixed the two flats on my zero-turn lawnmower. I will continue to monitor the pressure, but it's held for four days at the time of this review. Caution. Even with a flat tire and no air, pumping the product into the tire builds backpressure, and the internal two-piece pump shaft blew apart on me; afterward, the hose connecting to the value stem blew off. In short, a lot of fluid was lost. Finally, the bottleneck of the pump collapsed when the bottle was only half empty. It's not as smooth an install as you are led to believe. It is a good concept, but the pump bottle is cheaply made and does not hold up well to deliver all the product to the tires. It fatigues after around 50 - 60 pumps, and you wind up struggling to get the job done.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2023
★★★★★ 5
It did work
Size: 1-Pack (32 oz)
Sealed a small nail hole in a front tractor tire. Better than taking to shop for inside patch or making the 3x bigger for a rope patch.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Fixed a Bead Sealing Issue
Size: 1-Gallon (128 oz)
For traction in snow, I recently installed new "agricultural" style lugged front tires on a Simplicity garden tractor from around 1980. The tractor looks like it's survived a war, evidently having had a hard life as a workhorse owned by a school district.
The front rims are rusty, and I naively thought the beads of these thick tires would seal properly anyway. They didn't.
The jug of sealant ships with a valve core removal tool. Removing and reinstalling the cores is a piece of cake if you've never done it. I pumped a generous amount of the product into each tire and then did a few fast laps in a grassy paddock. It's a Kohler 19HP twin and it's a bit of a rocket. 😎 One tire sealed, the other didn't, and there was still a faint hiss. I added more product to that side and repeated the process. It seemed to hold. The next day that side was flat again, so I added more sealant and this time it held.
Based on this experience, I'd say that instead of strictly following what the instructions recommended as an amount per tire, keep adding product in increments until the tire holds air.
It's good stuff and it works. Will the tire self-heal if I puncture it? I don't know yet. It saved me the headache of having to remount these small tires or install tubes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026