HTX-TD0 Heat shrink marker, assembled

HTX-TD0 Heat shrink marker, assembledThe HTX TD0 heat shrink markers have the same properties as the HTX RS0 markers and therefore also meet the strict requirements of the rail vehicle industry. The markers are in ladder format with right and left flush adhesive strips, ensuring excellent marking with the TD4M 300 printer on both sides simultaneously. For an optimal result we recommend the use of our high quality ribbons. The HTX TD0 markers are supplied as standard on a space optimized

The HTX-TD0 heat shrink markers have the same properties as the HTX-RS0 markers and therefore also meet the strict requirements of the rail vehicle industry. The markers are in ladder format with right and left flush adhesive strips, ensuring excellent marking with the TD4M/300 printer on both sides simultaneously. For an optimal result we recommend the use of our high quality ribbons.

The HTX-TD0 markers are supplied as standard on a space-optimized cardboard reel with a maximum outer diameter of 300 mm, which can be disposed of in an environmentally friendly manner after use. More detailed information on compliance with EN 45545 and EN 50343 can be found in the data sheet. 

Note: When printing using the TX4/300 or TX4M/300 printer, an additional unwinding device is required as a material feeder, as the design cannot be accommodated in the printer. 

You can request samples of this product free of charge and without obligation!